System Controls - Kingspan AEROMAX PLUS AIR SOURCE HEAT PUMP PACKAGE Homeowner's Manual

SYSTEM
CONTROLS
SETTING YOUR HEATING
The programmable room thermostat lets you choose what times you want the
heating to be on, and what temperature it should reach while it is on. This will allow
you to select different temperatures in your home at different times of the day (and
days of the week) to meet your particular needs.
Weekdays (Mon-Fri)
Event Time Temp. °C
1 06:00 20
2 09:00 15
3 11:30 20
4 13:30 15
5 16:30 21
6 22:30 18
SETTING YOUR HOT WATER
The hot water and radiator systems cannot run at the same time so we
recommend that you set your hot water to come on 45-50 min. before you need
it. The hot water timings given in the tables below allow for the immersion heater
to beactivated after the hot water cycle in the morning. This will sanitise the tank
temperature to between 60-65ºC.
Typical winter settings for the programmable room thermostat and hot water time
switch are illustrated below.
Event No Hot water
1 1st ON
2 1st OFF
3 2nd ON
4 2nd OFF
AEROMAX PLUS AIR SOURCE HEAT PUMP PACKAGE
KINGSPAN HEAT PUMPS
Weekend (Sat-Sun)
Event Time
1 07:00
2 10:00
3 11:30
4 13:30
5 16:30
6 22:30
Mon - Fri Sat - Sun
03:30 05:00
05:00
15:00
15:50
Temp. °C
20
20
20
20
21
18
06:30
15:00
15:50
Page 5