Table of Contents
Advertisement
Installation
Intro
Operation
Customer
Warranty
Installation
Assistance
Where to Mount Your Unit
You will get optimum performance from your detector if you Mount it at a point
approximately in the center of the vehicle, as low as possible on the front windshield
Secondary Icons
without obstructing the unit's view of the road either to the front or rear. You can also
mount it directly on the dashboard.
Windshield Mounting
Notice
The unit's lens must not be blocked and the LaserEye should have a clear view
out the back window to allow 360° detection. If the GPS Locator unit is installed,
it must have a clear view of the sky to receive GPS signals.
The LaserEye Should Have a Clear View
Radar, laser and GPS signals pass through glass but not through other materials and
objects. Objects that can block or weaken incoming signals include:
Windshield wiper blades
n
Mirrored sun screens
n
Dark tinting at the top of the windshield
n
Heated windshields currently available on some vehicles
n
(Instaclear for Ford, Electriclear for GM). Consult your dealer
to see if you have this option.
2
English
Dashboard Mounting
Your Detector
Intro
Operation
Windshield Mounting
•
1. Attach the rubber cups
Secondary Icons
2. Make sure the rubber cups and your windshield are clean.
Notice
3. Push the bracket firmly onto
4. Attach the detector to
5. To adjust the angle if
6. Plug the power cord
7. Plug the cigarette lighter
8. You can temporarily remove the detector whenever
Installation
Customer
Warranty
Assistance
to the bracket.
the windshield.
the bracket. Check that
the unit is parallel to the
road's surface.
necessary, gently push or pull
on the bracket to bend it. DO
NOT use the detector to bend
the bracket.
into the detector.
adapter on the power
cord into your vehicle's
cigarette lighter.
you wish by depressing the bracket release button
and sliding it off the bracket.
Nothing Comes Close to a Cobra
3
®
Advertisement
Table of Contents
