Placing a Call
Dial an extension number
●
Or: Dial the external number required, phone will start to dial after 3
●
seconds
Call Transfer
While connected to an outside line, press the
Mode/Forward/Transfer
●
Dial the desired extension number, (700-899)
●
Hang up to complete call transfer
●
Or: Announce the call, then hang up to complete call transfer
●
External Call Transfer
While connected to an outside line, press the
Mode/Forward/Transfer
●
Enter in the external number
●
Hang up to complete call transfer
●
Holding Calls
To place call on hold
Press the
HOLD
button and hangup
●
To retrieve
Press the
HOLD
button and lift the handset
●
Retrieve a Parked Call
Dial the Call Park Location (601-609)
●
Call Pick-up
Dial
*1
to answer an unattended phone ringing in your area
●
LIP-8002 IP Phone User Guide
Using Speed Dial Numbers
Dial
*9
followed by the speed dial bin number
●
Redial
Press the redial button, to ring last dialed number (memory 100)
●
Button
Call Log
Press Call Log to view missed, received and placed calls, scroll through to
●
number and press ok button
Button
Voice Mail
Dial 999, enter password: <extension number> plus your pass-
word
Greetings:
Record Greeting
Messages:
Retrieve Message
Delete Message
Save/Skip Message
Replay Message
Call Forward
Press the
●
With the Navigation Control buttons you can select different modes of call
●
forward
Pres OK (Middle Navigation button) and enter in the number you wish to
●
divert to.
(01-19 or
200-999)
To cancel a Call Forward
Press the
●
Retrieving Voice Mail Messages Externally (DDI's)
Dial DDI Number
●
During Message press *key
●
Enter Authorisation Code (2 to 5 digits) followed by #
●
Follow prompts
●
Holding Calls
To place call on hold
Press the
●
To retrieve
Press the
●
Retrieve a Parked Call
Dial the Call Park Location (601-609)
●
Press
8
Press
1
Press
3# or Delete Soft Key
Press
2
Press
1
Mode/Forward/Transfer
Button
All Calls
On Busy
No Answer
Busy or No Answer
700-899
for other
extensions, 999
For Voicemail
Mode/Forward/Transfer
Button
HOLD
button and hangup
HOLD
button and lift the handset
Need help?
Do you have a question about the iPECS LIP-8002 and is the answer not in the manual?
Questions and answers