Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Equalizer Magnum XP EM415
Summary of Contents for Equalizer Magnum XP EM415
- Page 1 © 2008 Equalizer Industries, Inc. www.equalizer.com Revision 1/26/2015...
- Page 2 Equalizer Industries, Inc., reserves the right to refuse to repair, at our expense, any tool which has not been properly maintained as specified in the Users Guide. Particularly important are the following: 1.
-
Page 3: Sharpening The Blade
About Equalizer Auto Glass Cut-Out Knife Blades… ® Our blades are made of a special material. It has rounded edges and the correct Rockwell hardness so it will not bind or buckle inside the sheath. The serrated blades are made of spring steel and sharpened with a unique double-serration method for faster cutting action The blade is made of mild steel so it will not shatter. - Page 4 Keep your blades sharp! This is crucial for effective cutting action and tool longevity. A dull blade will destroy the drive mechanism in your Equalizer ® tool. Sharpen the blade between each removal with a diamond file. Be careful to maintain the original sharpening angle.
-
Page 5: General Safety Information
General Safety Information Always wear safety glasses and safety gloves when using Equalizer tools. ® Do not activate Equalizer tools until they are in the cutting position. Disengage ® the tool and let it stop before taking it out of the urethane. -
Page 6: Changing The Blade
It is acceptable to run The Equalizer Magnum XP on a generator. Be sure the generator produces at least 1000 ® watts of 120-Volt alternating current. You can also run The Equalizer ® Magnum XP on an inverter. Do not use an inverter smaller than 1000 watts. - Page 7 Changing The Sheath The sheath is held in place by four hex head screws. To change the sheath, loosen the screws and pull the sheath out of the sheath clamp. Insert the new sheath and tighten the screws. Use care not to overtighten the screws and crush the sheath.
- Page 8 Remove and replace windshields without breaking them. Because of the thin blade (it is actually .002” thinner than a normal piece of cut-out wire) you can use your Equalizer ® Magnum XP to remove auto glass without breaking it. Keep the blade moving and use Equalizer ®...
- Page 12 2611 Oakmont Drive Round Rock, Texas 78665 Telephone: 512.388.7715 Toll Free USA & Canada: 800.334.1334 FAX: 512.388.4188 Email: sales@equalizer.com Web: www.equalizer.com...
Need help?
Do you have a question about the Magnum XP EM415 and is the answer not in the manual?
Questions and answers