Package Contents; Getting Started; Assembly - ELECTRIC WHEELS EW-280 Owner's Manual

PACKAGE CONTENTS

Your EWHEELS EW-280 comes with the following items in the box. Please
locate all of the following:
1. The EWHEELS EW-280
2. 24V Battery Charger
3. Tool Kit
4. Product Handbook

GETTING STARTED

Please read and understand these instructions and the OPERATING
PROCEDURES section, prior to starting or riding your EW-280

Assembly

1. Carefully remove the EW-280 from the box.
2. To unfold the EW-280, begin by pressing
down on the FOLDING HANDLE with one
hand, while gently pulling up on the
handlebars with the other. The handlebar
will snap into place and will not move when
secured properly.
3. Loosen the handlebar clamp, and raise the
handlebar to the desired height, being sure
the pole snaps into place. Then tighten
clamp securely.
4. To attach the handlebars to each side of the
t-bar, first loosen the top handlebar clamp
then slide each handlebar into the t-bar
being sure they snap into place and are in
the correct orientation for riding. Finish by
clamping down the clamp lever securely.
Page7