Canon PowerShot SD970 IS Digital ELPH User Manual page 64

Once you compose the shot, such as for a group photo, and press the
shutter button, the camera will take three shots in a row two seconds after it
detects your face (p. 82) when you enter the composition.
Select
(~.
Follow Step 2 on p. 63 and select
t;;.
Compose the shot and press the
shutter button halfway.
Make sure a green frame appears on the
face of the focused subject and white
frames appear on other faces.
Press the shutter button fully.
~.
The camera will enter shooting stand-by,
and [Look straight at camera to start count
down] will appear on the screen.
The lamp will blink and the self-timer
sound will play.
Join the subjects and look at the
camera.
When the camera detects a new face, the
lamp and sound will speed up (the lamp
remains lit when the flash will fire), and
two seconds later the shutter will release;
The second and third shots will continue in
succession.
*;W
To restore the original setting, select
tm
in Step 2 on p. 63.
Even if your face is not detected after joining the subjects, the shutter will release
approximately 30 seconds later.
For the screen in Step 1, press the
MENU
button, then press the
~ ~
buttons to
change the number of shots. Press the
@
button to accept the setting. .
64