GHOST EPAC Ghost Original Operating Instructions page 169

GHOST EPAC
Malfunction
Drive does not supply
enough power
Drive starts unintentionally
Original operating instructions 11/2014
Possible cause(s)
Motor temperature
too high due to excessive load
If you place your foot on the
pedal and move the wheels
slightly, the electric drive will
start up.
E - H Y B R I D E A N D A S O L & A N D A S O L X
E - H Y B R I D E T E R U & T E R U F S
Remedy
Stop at an appropriate location and
wait until the motor has cooled
down.
Otherwise the power of the drive is
reduced until the motor tempe-
rature has gone down of its own
accord.
- You should only put your foot on
the pedal when you actually want
to move off.
- Always operate both brakes in
a stationary position and only
release them when you actually
want to move off.
EN
167