Installing And Dismantling The Saddle Post With The Saddle - GHOST EPAC Ghost Original Operating Instructions

GHOST EPAC
EN
6. Close your quick-release axle or thru axle in accordance with section 8.4.1,
Opening, closing the quick-release axles .
7. Press the rear wheel brake several times with the bicycle standing still.
8. Lift up the bicycle by the rear and turn the rear wheel by hand.
If a brake block is in contact with the wheel rim, this can indicate incorrect
mounting of the hub in the fork dropouts. In this case, apply the brakes to
the rear wheel, open the quick-release or thru axle and shake the rear wheel
back and forth lightly (sideways to the direction of travel).
Repeat the installation from step 5. If this does not improve the situation,
contact your specialist bicycle dealer immediately.
13.2

Installing and dismantling the saddle post with the saddle

In order to make it easier to transport your EPAC you can dismantle the saddle
post and the saddle. The saddle post is fastened with a clamp in the seat tube
of the frame. The clamping is performed by means of a quick-release axle and
knurled nut.
148
E - H Y B R I D E A N D A S O L & A N D A S O L X
E - H Y B R I D E T E R U & T E R U FS
Original operating instructions 11/2014