Adjusting The Epac; Adjusting The Saddle Position; Adjusting The Saddle Height - GHOST EPAC Ghost Original Operating Instructions

GHOST EPAC
EN
7

Adjusting the EPAC

NOTE:
You may carry out certain adjustments on your EPAC yourself. You should only carry
out this work yourself if you have the stated tools.
7.1

Adjusting the saddle position

Your saddle is attached with two clamping bolts. You need an Allen key and a
torque spanner with a 5 mm hexagon socket bit attachment.
Adjusting the horizontal position or angle of your saddle:
1. Loosen the clamping bolts by a few turns until the saddle can be moved easily
and/or the angle can be easily adjusted.
2. Move the saddle to the desired position.
3. Retighten the clamping bolts with the torque spanner. The specified tighten-
ing torque can be found on the seat post.
7.2

Adjusting the saddle height

1. Loosen the clamping of the saddle post.
See section 8.4.2, Opening and closing the quick-release axle on the seat post
clamp.
2. Move the saddle with seat post to the desired position.
Please follow the instructions for the insertion depth of the saddle post,
see section 13.2, Installing and dismantling the saddle post with the saddle.
3. Clamp the seat post securely in position.
124
E - H Y B R I D E A N D A S O L & A N D A S O L X
E - H Y B R I D E T E R U & T E R U FS
Original operating instructions 11/2014