Before Every Use; Checking The Wheels; Checking The Tightness - GHOST EPAC Ghost Original Operating Instructions

GHOST EPAC
6

Before Every Use


WARNING Danger from serious falls and accidents
A EPAC that is not completely ready for safe operation can lead to dangerous
riding situations, falls and accidents.
Check that your EPAC is safe for use before every journey.
Also consider the possibility that your EPAC may have fallen over or been
manipulated by unknown persons while unsupervised.
Memorise the correct condition of your EPAC when new so that you can later
more easily recognise any deviations from the correct condition.
NOTE:
Photographs you take yourself can be helpful in this.
Contact your dealer immediately if the inspection reveals faults of any kind.
You may correct small defects yourself if the appropriate measures are
described below.
You should contact your specialist bicycle dealer immediately if the measures
for rectifying the defect are not described, you cannot perform them yourself
or if these measures do not correct the problems.
You should only use your EPAC again when it has been made safe to operate.

WARNING Danger of injuries to fingers and arms, danger of accidents
During testing the EPAC might move off unexpectedly.
Please ensure that you turn off the electric drive before carrying out any checks
on your EPAC.
– Make sure that the electric drive is switched off.
See attached Bosch original operating instructions.
– Perform a visual check of all fastening screws to ensure that they are all
correctly attached. See section 1.4.3, Technical terms.
– Carry out a visual inspection of the entire EPAC for dents, cracks, deep
scratches or other mechanical damage.
– If the check reveals any faults:
Contact your specialist bicycle dealer.
6.1

Checking the Wheels

6.1.1

Checking the tightness

1. Shake both wheels strongly at right angles to the direction of travel.
The wheels must not move in their mounting.
The quick-release lever must be closed
See section 8.4, Quick-release axles.
No cracking or grinding noises should be heard.
Original operating instructions 11/2014
E - H Y B R I D E A N D A S O L & A N D A S O L X
E - H Y B R I D E T E R U & T E R U F S
EN
111