AIS CHW22L110-A3-5RT User Manual

21.5" industrial chassis monitor

Advertisement

Quick Links

Table of Contents
1. Introduction------------------------------------------------------------------------------------------- 3
2. Important Instructions------------------------------------------------------------------------------ 4
2.1 Note on the warranty------------------------------------------------------------------------ 4
2.2 Exclusion of Accident Liability Obligation---------------------------------------------- 4
2.3 Liability Limitation / Exemption from the Warranty Obligation----------------------4
3. Safety Instructions----------------------------------------------------------------------------------- 5
3.1 Electrostatic Discharge (ESD)------------------------------------------------------------- 6
3.2 Grounding Methods--------------------------------------------------------------------------6
The information contained in this document is subject to change without notice. This
document contains proprietary information that is protected by copyright © 2013
American Industrial Systems. All rights are reserved. No part of this document may be
reproduced, translated to another language, stored in a retrieval system, or transmitted by
any means, electronic, mechanical, photocopying, recording, or otherwise, without prior
written permission. Windows is a registered trademark of Microsoft, Inc. Other brand or
product names are trademarks of their respective holders.
American Industrial Systems, Inc.
http://www.aispro.com
The test results show that this device meets FCC rules. Those limits are set to protect residential areas
from harmful emissions from the devices. This device will produce, use and radiate radio frequency
21.5" Industrial Chassis Monitor
energy. In addition, failure to follow the user manual in order to install or use this device might produce
harmful interference with radio communication. Foregoing this information does not guarantee that this
type of harmful interference will not occur in some special instances. The interference caused by this
device to radio or television signals may be verified by turning the device on and off. Any changes or
modifications to this TFT LCD would void the user's authority to operate this device.
CHW22L110-A3-5RT
Important Recycle Instruction:
Lamp(s) inside this product contains mercury. This product may contain other electronic waste that can be
hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal Laws.
For more information, contact the Electronic Industries Alliance at WWW.EIAE.ORG. For lamp specific
disposal information check WWW.LAMPRECYCLE.ORG
American Industrial Systems – 21.5" Industrial Chassis Monitor User Guide
User Guide
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CHW22L110-A3-5RT and is the answer not in the manual?

Questions and answers

Summary of Contents for AIS CHW22L110-A3-5RT

  • Page 1 Any changes or modifications to this TFT LCD would void the user’s authority to operate this device. CHW22L110-A3-5RT Important Recycle Instruction: Lamp(s) inside this product contains mercury. This product may contain other electronic waste that can be hazardous if not disposed of properly.
  • Page 2: Table Of Contents

    Table of Contents INTRODUCTION ..............................3 IMPORTANT SAFETY INSTRUCTIONS ........................4 2.1 E (ESD)..........................5 LECTROSTATIC ISCHARGE 2.2 G .............................5 ROUNDING ETHODS 2.3 FCC S ..............................5 TATEMENT 2.4 E ...........................5 LECTROMAGNETIC APABILITY 2.5 I LCD I ..........................6 MPORTANT NFORMATION PACKAGING LIST ..............................7 PRODUCT DESCRIPTION............................
  • Page 3: Introduction

    Introduction This user manual is designed for American Industrial Systems, Inc. Included is a comprehensive overview of the systems designed by American Industrial Systems. All rights are reserved. None of this document shall be duplicated, stored in a retrieval system, or transmitted by all means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of American Industrial Systems, Inc.
  • Page 4: Important Safety Instructions

    Important Safety Instructions This chapter also includes information on approval and interference inhibition of your unit. Please abide by the warnings and instructions on the unit and in the manual. Please read these instructions carefully before using the product and save it for later reference. ...
  • Page 5: Electrostatic Discharge (Esd)

    2.1 Electrostatic Discharge (ESD) A sudden discharge of electrostatic electricity can damage electrostatic-sensitive devices or circuit. Adequate packaging and grounding techniques are essential fundamentals to avoid damage. The following precautions should be always taken: 1. Deliver printed circuit boards in electrostatic-safe containers such as cartons, boxes or anti-static bags.
  • Page 6: Important Lcd Information

    2.5 Important LCD Information American Industrial Systems – 21.5” Industrial Chassis Monitor User Guide Page 6...
  • Page 7: Packaging List

    Packaging List Item Description Note 1 User Manual 1 CD for Touchscreen Drivers & Tools 1 Power Cord 1 Power Adapter American Industrial Systems – 21.5” Industrial Chassis Monitor User Guide Page 7...
  • Page 8: Product Description

    Product Description 4.1 General Information The AIS 21.5" industrial chassis and VESA mount touch screen monitor is fully-integrated, off-the-shelf unit (COTS) that combines five-wire resistive touch technology, in an industrial-grade LCD flat panel, with a sleek and flat front surface industrial design. These displays provide reliability, durability, and expected longer product life.
  • Page 9: Mechanical Drawings

    Mechanical Drawings (mm) American Industrial Systems – 21.5” Industrial Chassis Monitor User Guide Page 9...
  • Page 10: Touch Screen Solution

    Touch Screen Solution 6.1 Introduction to Five-Wire Resistive Touch Screen The five-wire resistive touchscreens use a glass panel with a uniform resistive coating. A thick polyester coversheet is tightly suspended over the top of the glass, separated by small, transparent insulating dots. The coversheet has a hard, durable coating on the outer side and a conductive coating on the inner side.
  • Page 11: Installing The Display

    Installing the Display 7.1 Signal Cable 7.1.1 VGA Signal Shielding Cable Connection 1. Plug one end of the 15-pin signal cable to the video signal connector at the rear end of the PC system and the other end of the cable to your military display. 2.
  • Page 12: Starting The Monitor

    7.2 Starting the Monitor Connect the Adapter to the monitor by the cord into the bottom of the monitor. Connect the power cord to the adapter, and plug in the power to an outlet securely. American Industrial Systems – 21.5” Industrial Chassis Monitor User Guide Page 12...
  • Page 13: Vesa Wall Mount Installation

    7.3 VESA Wall Mount Installation This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface standard which defines a physical mounting interface for flat panel monitors. It also corresponds with the standards of flat panel monitor mounting devices, such as walls and table arms. The VESA mounting interface is located on the back of your monitor.
  • Page 14: Lcd Display Operation

    LCD Display Operation 8.1 Simple Troubleshooting Guide 8.1.1 Brief FAQ 1. What if the display has no power after you push the power button? a. Make sure your power resource is working and your power cord is securely connected into the plug-in. b.
  • Page 15: Additional Troubleshooting Chart

    8.1.2 Additional Troubleshooting Chart: For more information, please go to the website http://www.aispro.com and contact technical support to help resolve your issue. You can also e-mail support at support@aispro.com. We will be happy to help. American Industrial Systems – 21.5” Industrial Chassis Monitor User Guide Page 15...
  • Page 16: Appendix

    Appendix 9.1 Cleaning the Monitor 1. Make sure the monitor is turned off. 2. Never spray or pour any liquid directly on the screen or case. 3. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 4.
  • Page 17: Touch Screen Driver Installation

    9.2 Touch Screen Driver Installation The monitor is available with USB connection. The Linux kernel 2.6.x (32 bit & 64 bit) touch driver is located on the enclosed CD-ROM. HID for Windows® 7, VISTA , XP, 2000, ME, 98. Please Note: The system requires 15 seconds for Windows®...
  • Page 18: Rma (Return Material Authorization) Service

    Describe the behavior or reason of unit failure in order to return. Any returns for credit are subject to a restocking fee. Upon confirmation of a hardware failure or valid cause for return, AIS will provide a Return Merchandise Authorization (RMA).

This manual is also suitable for:

Ip17l540-m1-5rt

Table of Contents