Access Point Mode - PHICOMM FWN-650N User Manual

www.phicomm.com
3) Access the web-based utility of the router (refer to the router's documentation for
instructions), and input PIN Code (e.g. 92596061), click Save.
4) Wait two minutes, the adapter will connect to the router automatically. The WPS-PIN
method configuration is complete.
Push Button Config (PBC)
It is a method to connect to the network by pressing WPS button on the wireless device.
Operation as follow:
1) Click Push Button Config (PBC) button, WPS will be initiated as window below.
2) Press the WPS button on the wireless device until the WPS LED lights up.
3) Wait two minutes, the adapter will connect to the wireless device automatically. The
WPS-PBC method configuration is complete.
Note: If your router does not have this button, click Cancel and refer to PIN Input Config (PIN).
External Registrar
It is a method to connect to the network by inputting PIN (Personal Identification Number) code
of your router into the adapter utility page. Operation as below:
1) Click External Registrar button.
2) Follow the instruction to complete the configuration.

Access Point Mode

The device can also serve as an access point to transmit wireless signals and to create a wireless
network, allowing other wireless devices to connect to internet by accessing its network.
150Mbps Wireless N USB Adapter
Chapter 3: Configuration
10