Connections; General Information - CBE CB 510 Instruction Manual

GB
The CB 510/516 switch-mode battery charger has been expressly designed for the caravanning and
boating sector and can automatically charge 12V
The battery charger is protected against overtemperature and the 12V
short circuit and polarity inversion.
The charging system is carried out in 4 stages:
1)
battery charging
Note: the end-charge voltage is reached only if the battery is efficient.
2) when the
end-charge
batteries) or 8 hours (gel batteries) with constant voltage.
3) voltage holding 13.8V
Constant
4) After 10 hours, the battery charger reaches the
when the battery voltage is lower than 13V
The high frequency switching technology allows to have high performances with small dimensions and
limited weight.

CONNECTIONS

Battery
Pb / Gel
F1
1 WHITE
12V
1)
2)
3)
-
+
S
4)

GENERAL INFORMATION

with maximum current until the end-charge voltage is reached:
threshold is reached the charger continues to operate for 90 minutes (lead
(gel batteries) or 13.5V
CB 510 15A
CB 516 25A
1
CONNECTION
+ 12V supply
- 12V supply
N.C.
Net signal (+12V )
- Technical data are indicated also in the label inside the cover -
lead batteries.
(lead batteries)
mode and begins to operate again only
stand-by
.
2
2 WHITE
230Va.c. CONNECTION
N L
5
outputs are protected against
230V On/Off
Fuse 230V
F2 - T 2A
1) Masse
2) Neutral
3) Line