Advertisement
Quick Links
THIS WARRANTY IS VALID IN AUSTRALIA AND NEW ZEALAND ONLY.
Each Steelcraft unit is thoroughly inspected in our Quality Assurance department
prior to delivery. In the unlikely case that you find any material or workmanship
that effects the units normal operation, we will repair the unit free of charge
within 12 months of purchase. You are required to present your receipt as proof
of purchase. For all concerns with your product please contact our Customer
Service Team.
Please read all the information carefully before using this product. This warranty
does not apply to failure due to improper care, or normal wear and tear caused
by product use. We reserve the right to inspect the unit. You may be charged for
repairs if the product has been damaged accidentally.
This warranty does not apply to a high chair used for commercial purposes.
Your new product has been manufactured to comply with the ASTM F977-09
Due to our continuing program of development, Britax reserves the right to alter the specifications, colour
or design without any further notice.
The Steelcraft trademark is the property of Britax Childcare Pty. Ltd-Australia.
Visit the Britax website at: www.britax.com.au or email us at au-custserv@britax.com
Due to the variations in the style and design of our products the illustrations used in this instruction
booklet are generic.
2010 Copyright Britax Childcare Pty. Ltd. Australia
Swift 3 in 1 Baby Walker
Art No.4001346
KEEP INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE
series BG1113
Advertisement
Summary of Contents for Steelcraft Swift 3 in 1 Baby Walker
- Page 1 THIS WARRANTY IS VALID IN AUSTRALIA AND NEW ZEALAND ONLY. Each Steelcraft unit is thoroughly inspected in our Quality Assurance department prior to delivery. In the unlikely case that you find any material or workmanship that effects the units normal operation, we will repair the unit free of charge within 12 months of purchase.
-
Page 2: Safety Warnings
• To prolong the life of your walker keep it clean and do not leave it RETAIN FOR FUTURE REFERENCE. in the direct sunlight for extended periods of time. READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND USE • Removable fabric covers and trims may be cleaned using warm OF THIS WALKER. - Page 3 NOTES • Do not allow children to stand on the seat. • The baby walker should not be used by children who can walk unaided. • Discontinue use of the walker should any part become damaged or broken. • Do not store outdoors. •...
-
Page 4: Parts List
PARTS LIST NOTES 1 x Push bar 1 x Upper Plate 2 x Connectors 1 x Seat Frame 1 x Padded Seat Back Wheels Front Wheels 2 x Front Swivel Wheels 6 x Grip pads 2 x Back Wheels... - Page 5 NOTES PARTS LIST 1 x Toy Tray 1 x Foot Toy Pad 2 x Toy Poles 1 x Toy Car 2 x Connectors...
- Page 7 NOTES 01. TO ASSEMBLE THE WALKER (Cont) Insert the tab on the front of the seat frame into the slot on the upper plate of the walker then press the back hook down onto the push bar until you hear a ‘click’ and it locks into place. Back hook •...
- Page 8 01. TO ASSEMBLE THE WALKER (Cont) NOTES Connect the grip pads in the positions shown in the picture by inserting the two pegs on each grip pad into the holes located around the base the of the walker. Push all the way in.
-
Page 9: To Install The Batteries
NOTES 02. TO INSTALL THE BATTERIES IMPORTANT: BATTERIES ARE NOT INCLUDED. 3 “AA” (1.5V) SIZE BATTERIES ARE REQUIRED FOR THE FOOT PEDAL. 2 “AA” (1.5V) SIZE BATTERIES ARE REQUIRED FOR THE TOY CAR. IMPORTANT: USE THE APPROPRIATE SIZE PHILLIPS HEAD SCREWDRIVER TO UNSCREW THE BATTERY COVERS. - Page 10 02. TO INSTALL THE BATTERIES (Cont) NOTES FOOT TOY PAD BATTERIES To insert the batteries, locate the battery housing underneath the foot toy pad. Unscrew the screw on battery cover then push cover down firmly until you a ‘click.’ Insert 3 “AA” batteries observing the correct positive and negative positions.
- Page 11 02. TO INSTALL THE BATTERIES (Cont) 07. TO USE THE WALKER IN ‘STAND AND PUSH ALONG’ MODE (Cont) NOTES TOY CAR The walker is now ready to use in the ‘Stand and Push Along’ mode. To insert the batteries, locate the battery housing underneath The push bar will give baby something extra to grip as your child the toy car.
- Page 12 07. TO USE THE WALKER IN ‘STAND AND PUSH ALONG’ MODE (Cont) NOTES 03. TO INSTALL THE FOOT TOY PAD PLEASE NOTE: THERE ARE THREE FOOT TOY PAD POSITIONS. Position and secure the foot toy pad at the front of the walker THE FOOT TOY PAD MUST BE FITTED WITH THE CURVED EDGE (Position A) with curved edge facing towards the back of the FACING OUTWARD AS SHOWN IN THE DIAGRAM.
- Page 13 07. TO USE THE WALKER IN ‘STAND AND PUSH ALONG’ MODE 04. TO ASSEMBLE AND INSTALL THE TOY TRAY NOTE: The Stand and Push Along Mode is suitable for babies Insert the toy pole connectors into the holes on the toy tray and push down until they lock into place.
- Page 14 07. TO USE THE WALKER IN ‘SIT AND STEP’ MODE 04. TO ASSEMBLE AND INSTALL THE TOY TRAY (Cont) Attach the toy car to the toy tray by inserting the front of the car NOTE: The Sit and Step Mode is suitable for babies who can into the slot on the troy tray then push the back of the car down.
- Page 15 06. TO USE THE WALKER IN ‘SIT AND PLAY’ MODE 04. TO ASSEMBLE AND INSTALL THE TOY TRAY (Cont) The toy car also comes with an accessory strap. It can be NOTE: The Sit and Play Mode is suitable for babies who can attached to other nursery or furniture items.
Need help?
Do you have a question about the Swift 3 in 1 Baby Walker and is the answer not in the manual?
Questions and answers
How do I fold it down