Changing The Display Mode; Recharging The Stopwatches - TTS Rechargeable Stopwatches User Manual

Changing the Display Mode

The display can be configured to show time in 3 different modes:
To change the display mode, use a paper clip to toggle the concealed mode
button between the start/stop and reset buttons (see Know Your Stopwatches,
p.3). Each time the button is pressed the display will change mode.

Recharging the Stopwatches

The stopwatches are recharged by inserting them
into the Docking Station and plugging the Docking
Station into the mains, using the mains power
adapter included.
There is a battery
indicator on the
stopwatch display
which shows the
amount of
battery charge.
All 12
stopwatches may
be charged at the
same time in the
Docking Station.
4
minutes and seconds
minutes, seconds and 1/10 seconds
minutes, seconds, 1/10 and 1/100 seconds