Advertisement
Quick Links
Download this manual
See also:
User Manual
InstallatIon manual
SAFERA Smart R Stove Guard
with power control unit PCU3
5
v4.2.1 EnG smart r PCu3
1
Advertisement
Related Manuals for SAFERA Smart R Stove Guard
Summary of Contents for SAFERA Smart R Stove Guard
- Page 1 InstallatIon manual SAFERA Smart R Stove Guard with power control unit PCU3 v4.2.1 EnG smart r PCu3...
- Page 2 2. Installation using or installing the appliance. 3. troubleshooting Install and check the application accord- ing to the instructions. SAFERA is not li- 4. optional: Installing the Water leakage able for any damages or expenses caused sensor by inappropriate installation.
- Page 3 ❸ Indicator light for child proof lock ❹ Indicator light for normal activity saFEra smart r is compatible with cook- ❺ Warning light for cooktop hazard ers no wider than 90 cm, see installation ❻ Warning light for cooktop fire step 1/6.
- Page 4 InstallatIon - step 1/6 mount the Central unit Ⓐ. Install the Central unit Ⓐ according to the dimensions below. 497 or 597 mm Width Cooker Installation align the Central unit width Height ±15 mm with the cen- max. 60 cm 45 - 75 cm tre of the cooktop.
- Page 5 mount the Central unit Ⓐ. You have two mounting options: 10mm ⚐ ATTENTION The Central Unit Ⓐ is plugged into the wall socket with its own power supply Ⓓ.
- Page 6 InstallatIon - step 2/6 mount the Power Control unit Ⓒ. Install the Power Control unit PCu3. 230V 16A 400V 10A 230V 16A 400V 10A 230V 16A 400V 10A MICRO DISCONNECTION ѥ WARNING ⚐ ATTENTION Make sure that there is no power supply Power Control Unit requires a neutral to the cooker and the oven by removing wire to operate.
- Page 7 Installation mount the Power Control unit on the wall behind the cooker or into the cabinet next to the cooker. Couple the protective earth first (PE). Couple the other wires. Don’t reconnect the power to the cooker yet. 130 mm 180 mm 60 mm 5 x 2,5 mm 0,7 m optional water sen- sor connection.
- Page 8 InstallatIon - step 3/6 set up the wireless connection Connect the power supply Ⓓ to the Central unit Ⓐ. Press adjustment mode button ❽: indicator lights ❺, ❻ and ❼ start blinking by turns. Put back the fuses for the cooker and the oven.
- Page 9 InstallatIon - step 4/6 Kalibroi virranhallintayksikkö Calibrate the system When the indicator lights for child proof lock and normal activity (❸ and ❹) start blinking by turns, calibrate the cooker. Choose from the two options: OpTION 1: OpTION 2: Cooker and oven are connected to Only cooktop is connected to the Power Control unit Ⓒ.
- Page 10 InstallatIon - step 5/6 adjust the alarm limit Check the closest recom- location of the Installation alarm limit mended alarm limit from Cooker Height (1-12) the reference table on the right. In a corner 75 cm the range is 1-12: 65 cm 1 = reacts fastest 55 cm...
- Page 11 When you adjust the alarm Warning lights number of alarm limit limit, the new alarm limit is beeps indicated as shown in the table ••• ••• on the right. ••• •• ѧ HINT ••• • You may check the alarm limit ••• by pressing the adjustment ••...
- Page 12 InstallatIon - step 6/6 ReaDY! Check-list Check the working order of the appliance and fill in the installation checklist: ፌ all the burners of the cooker cause a child proof lock alarm. ፌ the oven (if connected) causes the child proof lock alarm. the sound signal is lower than the signal from the cooker child proof lock. ፌ...
- Page 13 Blinks three times: Power supply Ⓓ malfunction. Blinks once: the extinguisher unit Ⓔ is triggered and needs to be re- placed. Please contact your vendor or saFEra product support. Blinks twice: the connection of the extinguisher unit Ⓔ is faulty.
- Page 14 4. InstallInG thE WatEr lEaKaGE sEnsor (optional) stove Guard can be equipped with max. four saFEra Water leakage sensors. the sensors are placed in the typical leakage areas, e.g. under the dishwasher or sink. attach the sensors Ⓕ in place.