Subscribe to Our Youtube Channel
Related Manuals for Automated Pet Care Products Litter-Robot II
Summary of Contents for Automated Pet Care Products Litter-Robot II
- Page 1 Litter-Robot™ II Manual Standard Unit For Standard and Bubble Units The Self-Cleaning Litter Box that Really Works! Bubble Unit Toll Free: 877-250-7729 www.Litter-Robot.com Toll Free: 877-250-7729 www.Litter-Robot.com...
-
Page 2: Table Of Contents
Table of Contents Important – Read This First Important – Read This First ......4 The Litter-Robot™ has been designed to be used as Introduction ............ 5 a self cleaning litter box for cats between 5 and 15 Setting Up Your Litter-Robot ......7 lbs. -
Page 3: Introduction
Thank you for purchasing the Litter-Robot™, the self- cleaning litter box that really works! At Automated Pet Care Products, Inc. we aim to develop pet products that make your life easier. This manual will help you get the most out of your Litter-Robot. We will... -
Page 4: Setting Up Your Litter-Robot
Now fill the Globe with litter. The Litter-Robot litter Setting Up Your Litter-Robot sifting system requires a clumping type litter to work properly. We recommend a high quality clay- based clumping litter such as Litter-Robot Brand Place the Litter-Robot in the same location as the Premium Clumping Litter. - Page 5 simply rotate the globe back and away from you the Control Panel or by turning the unit OFF then such that the opening is in a more upward ON with the switch on the back of the Base. If you orientation making it easier to pour or scoop litter accidentally over-fill the globe, excess litter will be into the Globe.
- Page 6 After pouring litter in the Globe through the waste ports, pressing any button on the Control Panel will return the Globe to the home position. Next, grab the handle of the Internal Guard and rotate it downward (counter-clockwise). This closes the Internal Guard.
-
Page 7: Getting Your Cat To Use The Litter-Robot
may want to prevent her from stepping on the Getting Your Cat to Use the Litter-Robot drawer during this phase to allow the initialization cycle to be completed without interruption. Most likely, your cat will quickly adapt to the Litter- To ensure that your cats ease into this new litter Robot. -
Page 8: Control Panel
If your cats are not using the Litter-Robot within a Control Panel few days, continue using the old brand of litter in the old litter box, and let it go as long as possible without cleaning it. Cats prefer a clean litter box and a dirty litter pan might persuade them to use the clean Litter-Robot. - Page 9 3. “Empty” Button Control Panel Lockout Feature The “Empty” cycle removes most litter from the Globe, bypassing the sifting screen. This cycle is The Control Panel Lockout Feature prevents convenient for removing the old litter prior to children (or your pet) from pressing the buttons cleaning the interior of the Globe.
-
Page 10: Installing Garbage Bags In The Waste Drawer
Installing the Lip Extender Installing Garbage Bags in the Waste Drawer If the Lip Extender did not come assembled to the Globe, or if you need to reassemble it, please follow Your Litter-Robot is shipped with a 10 gallon trash the instructions below: bag already installed in the waste drawer - two extra trash bags have been provided. - Page 11 Toll Free: 877-250-7729 www.Litter-Robot.com Toll Free: 877-250-7729 www.Litter-Robot.com...
-
Page 12: How The Cat Sensor Works
Caution How the Cat Sensor Works Always use the included Lip Extender to prevent The Litter-Robot Cat Sensor is a weight sensitive switch damage to the circuit board from litter box misses. that detects your cat entering or exiting the Globe. Soaking of the Control Panel in either water from cleaning, or urine from a cat continually missing the Your cat must be at least five (5) lbs for the... -
Page 13: Testing The Cat Sensor
4. With the green light on (“OK/Waiting”), gently press Testing the Cat Sensor down on the step with your hand until you sense a slight displacement or tilt, then release (see figures 1. First, ensure that the Litter-Robot contains the right below). -
Page 14: Adjusting The Cat Sensor Sensitivity
4. TO DECREASE THE SENSOR SENSITIVITY Adjusting the Cat Sensor Sensitivity To decrease the sensor sensitivity, lift the front of the Base unit and turn the Rotatable Foot to the Note: The cat sensor is set at the factory for right (about 2 full turns at a time –... -
Page 15: Safety Features
6. Next, if it was removed earlier, slide the waste drawer back into the Base unit and place the Globe Safety Features back on top of the Base. Now, test the function of the Cat Sensor again. Cat Re-Entry Protection Mode If the red light stays on after attempting to reset the If the Cat Sensor detects that your cat is trying to enter unit, the Cat Sensor is too sensitive. -
Page 16: Cleaning And Maintenance
Internal Guard Cleaning and Maintenance The Litter-Robot Globe has an Internal Guard that The Litter-Robot requires no special maintenance. We covers the waste ports. The purpose of the Internal recommend that you do not lubricate the four plastic Guard is to prevent cats from entering the Globe ‘glide buttons’... - Page 17 Press the "Empty" button to rotate the globe to the Carbon Filter discharge position, with the waste ports directed into the The Litter-Robot comes equipped with a flexible carbon drawer. After the litter has dumped into the waste filter pad for absorbing odors in the drawer. The carbon drawer, you can press any button on the Control Panel filter can be easily removed and replaced when cleaning to return the Globe to the home position.
-
Page 18: Money Back Guarantee And Warranty
Litter-Robot, just return the unit to us within 90 days for If you have any questions, concerns or need assistance, a full refund of purchase price. Please note that you are contact Automated Pet Care Products, Inc.; we’ll be glad responsible for return shipping cost. to help. -
Page 19: Frequently Asked Questions
Frequently Asked Questions What if my cat won't use the Litter-Robot? If you and your cat are not completely satisfied, just Will my cat actually go inside the Globe? return your Litter-Robot within 90 days of purchase for a full refund of the purchase price. Please note that you Cats are generally curious and will investigate any new are responsible for return shipping costs. - Page 20 Will the Globe turn while my cat is inside? Does the Litter-Robot work with Feline Pine? No, the Globe will not turn while your cat is inside. The No, Feline Pine pellets are too large to pass through the Cat Sensor is tripped each time a cat enters, or re-enters sifting screen.
-
Page 21: Troubleshooting
How do I clean the Litter-Robot exterior? Troubleshooting Cleaning the Litter-Robot exterior is easy. Just remove Please also visit: the Globe and the Drawer and give them a sponge bath, http://litterrobot.kayako.com/Troubleshooter/List or take them outside for deep cleaning with the garden hose. - Page 22 Plug the power cord back in and turn the unit on. The Litter-Robot performs an initialization cycle. If the condition persists, please call Customer Service, toll-free, at 1-877-250-7729. Automated Pet Care Products, Inc. 40 W. Howard, Suite 101 Pontiac, MI 48342 Toll Free: 877-250-7729 Fax: 248-253-1797 www.litter-robot.com...
Need help?
Do you have a question about the Litter-Robot II and is the answer not in the manual?
Questions and answers