Screen; Location & Security - Pantech Element User Manual

Settings
Setting feedback options
1. Tap Settings > Sound.
Audible selection
2. Tap if you want to play sound when making
selection on the screen.
3. Tap Screen lock sounds if you want to play sound when locking and
unlocking the screen.
4. Tap Haptic feedback if you want the Element to vibrate when you tap
soft keys. It is selected by default.

Screen

Setting brightness
Settings Screen > Brightness.
1. Tap >
2. Drag the pointer to the right to increase the brightness. Drag it to
the left to decrease the brightness. Tap
want the Element to adjust brightness automatically.
3. Tap OK.
Setting auto-rotate screen
1. Tap Settings > Screen > Auto-rotate screen
screen rotate automatically when you move the Element horizontally
or vertically.
Setting animation options
1. Tap Settings > Screen > Animation.
2. Tap No animations, Some animations
Automatic brightness
if you
if you want to make the
or All animations.
Setting screen timeout
1. Tap Settings > Screen
2. Select and tap the time interval to turn off the screen.
Location & security
Setting my location
Settings Location & security
1. Tap >
Agree
2. Tap to allow Google's location service to collect anonymous
location data.
3. Tap Use GPS satellites
Configuring screen lock
1. Tap Settings > Location & security
2. Tap an option for screen lock:
Off
Tap if you do not want to lock the screen.
x
Tap Not secured if you do not want an additional lock for the
x
screen.
3. Tap Pattern, PIN Password
or
pattern, PIN or password, and take the necessary steps.
Setting screen lock with a pattern
Settings Location & security
1. Tap >
2. Tap Pattern.
3. Watch how you should draw a pattern and tap Next.
4. Drag your pattern on the screen and tap Continue. Make sure to
connect the pattern with at least four dots. Tap
another pattern if you want to set up another one, and tap Continue.
60
> Timeout.
Use wireless networks.
>
if you want to find street-level locations.
> Configure lock
if you want to lock the screen with
Configure lock
>
Retry
screen.
screen.
and draw