Let’s get started These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. Getting started... Safety Before you start Quick start more detail... Technical and legal information Care and maintenance...
Page 3
Safety PLEASE READ THE FOLLOWING INSTRUCTIONS CARE- FULLY BEFORE USING THE APPLIANCE. CAUTION - Fire, electric shock, physical injury and material damage hazards: To use the appliance, always follow the instructions for assembly, use and maintenance as well as usage cautions: 1.
Page 4
Safety 17. Do not use this heater with a programmer, timer, separate remote-control system or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly. WARNING : In order to avoid overheating, do not cover the heater.
Before you start Things to check before you start For domestic use only. Never allow children or persons unable to operate the appliance safely, use this appliance without supervision. Please dispose of plastic bags carefully and keep them away from children. This appliance is designed for use as a supplementary heat source, it is not intended to be the main source of heat.
Page 7
Quick start Safety Control (Thermal Cut-Out): CAUTION - This product has two overheat protection devices. The first protection device is an overheat switch which can be re-set, once the cause of the overheating has been removed AND the heater has cooled down. The product can then continue to be used normally.
Technical information Technical specifications > Model: FH-203 > Power supply: 220-240V~ 50Hz > Rated Power: 1700-2000W > Class II Conforms to all relevant European Directives.
Care and maintenance Maintenance and cleaning 1. Switch off and unplug from the power supply before cleaning. 2. Using a soft, moist cloth, with or without a mild soap solution, carefully clean the exterior surface of the product. CAUTION: Allow the product to completely cool before handling or cleaning it.
Care and maintenance Plug Replacement This appliance is supplied with a BS1363 3 pin plug fitted with a 13 Amp fuse. Should the fuse require replacement, it must be replaced with a fuse rated at 13 Amp and approved to BS1362. In the event the mains plug has to be removed/replaced for any reason, please note: IMPORTANT: The wires in the mains lead are coloured in accordance...
Page 11
B&Q plc, Chandlers Ford Hants SO53 3LE United Kingdom www.diy.com...
Need help?
Do you have a question about the FH-203 and is the answer not in the manual?
Questions and answers