Spin Efficiency Class; Technical Data - Siemens WM10K200GC Instruction Manual And Installation Instructions

Programme + button
Î Cottons 60 °C + ¦ eco
Î Cottons 40 °C + ¦ eco
Programme setting for testing and energy labelling in accordance with Directive 2010/30/EU with cold
water (15 °C).
The specification of the programme temperature is based on the temperature stated on the care label
in the textiles.The specification of the programme temperature is based on the temperature stated on
the care label in the textiles. The actual washing temperature may deviate from the stated programme
temperature for energy-saving reasons.

Spin efficiency class

The spin efficiency class of your
appliance can be seen on the energy
label. ~ Page 29
The percentage of residual moisture for
the spin efficiency class in question can
be seen in the following table.
Spin efficiency class
A (highest efficiency)
B
C
D
E
J

Technical data

a l T e c h n i c
Dimensions:
850 x 600 x 590 mm
(Height x width x depth)
Weight
63-83 kg (depending on model)
Mains connection:
Mains voltage 220-240 V, 50 Hz
Nominal current 10 A
Load Approx. consumption values
Energy consumption Water
3.5 kg 0.80 kWh
3.5 kg 0.73 kWh
Residual moisture D
in %
D < 45
45 <= D < 54
54 <= D < 63
63 <= D < 72
72 <= D < 81
Nominal output 2300 W
Water pressure:
100-1000 kPa (1-10 bar)
Power consumption when switched
off:
0.14 W
Power consumption when ready for
use (left-on mode):
1.37 W
d a t a
Technical data
Programme dura-
tion
41 litres 3 ^ h
41 litres 3 ] h
en
31