Connections; Connecting To A Tv - Toshiba DVD VIDEO / CD / VCD 5 DISC CAROUSEL CHANGER Owner's Manual

Connections

Connecting to a TV

Connect the DVD video player to your TV.
For details of output sound, see
Connecting to a TV
Signal flow
To wall
outlet
Notes:
• Refer to the owner's manual of the connected TV as well.
• When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the
wall outlet before making any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD video player to a Y
cable adapter (not supplied) and then connect to your TV.
• Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination
or video selector, the playback picture may be distorted as DVD video discs are copy protected.
• Analog audio out will not have sound if DTS playback is selected.
Downloaded From Disc-Player.com Toshiba Manuals
31
COAXIAL
To S
(yellow) (red)
VIDEO
OUT
To VIDEO To ANALOG AUDIO OUT
OUT
S video cable (not supplied)
If the TV has an S video input, connect the
DVD video player with an S video cable.
When using an S video cable, do not
connect the yellow video cable and
component video cables (Y/P
(white)
Audio/video cable (supplied)
/P ).
B R
• Make the following setting.
* Only for analog video out jack (yellow)
To audio inputs
To video input
(yellow) (red) (white)
To S video input
TV or monitor with
audio/video inputs
On-screen display Select
"Raw"
"Digital Out"
or "PCM"
"CVBS" or
"Video Output"
* "YUV"
connection with progrssive scan off.
Page
38
43
38
42