Operation - Quintezz EC-Q35 User Manual

Ac/dc compressor cooler - freezer
Table of Contents

Advertisement

1. Lid;
2. Case;
3. Control panel with LED display & buttons;
4. Handle (2x);
5. Connection for 12/24V DC;
6. Connection for 230V AC

OPERATION

All operating elements necessary to use this unit are gathered together into a single operator
panel in the upper part of the cooler.
7
7.
Main switch for turning the unit on and off.
8.
Selector switch for full cooling performance at maximum power consumption
("TURBO") or energy-efficient operation at reduced cooling performance.
9.
Digital display of the desired/actual temperature.
10.
Pre-select button for setting the desired cooling temperature or raising the
temperature setting in increments of 1° C.
11.
Pre-select button for setting the desired cooling temperature or lowering the
temperature setting in increments of 1° C.
After the cooler has been set up, connected and switched on, the digital display will indicate
the measured temperature in the cooler (e.g. 20°). You can now use the pre-select buttons
to set the desired temperature in increments of 1° by pressing the minus or plus button
repeatedly until the digital display shows the desired cooler temperature (e.g. -12°). If
you now release the pressed button, the pre-set value will be confirmed by blinking in the
display. Thereafter, the display will again show the actual temperature inside the cooler and
the box will refrigerate the cool-space until the desired temperature has been reached. The
cool-space has zones with slightly differing temperatures. The display always reflects an
approximate average temperature.
Operate the unit in TURBO mode for particularly low pre-select temperatures (under –12°
C) or to rapidly cool your refrigerated items. This will increase the cooling performance of
the unit.
Memory function: The cooler's electronics stores the last-set cooling temperature. If the
cooler is switched off and then at some later time switched on again (without setting a new
temperature), the box will "remember" the last preset temperature and automatically use
this setting.
8
9
- GB-4 -
10
11

Advertisement

Table of Contents
loading

Table of Contents