7. Do not operate unit with a damaged power cord or if the unit has been dropped or damaged. To avoid risk of electrical shock, do not disassemble unit; contact Steamfast Consumer Service for examination and repair. Incorrect reassembly can cause a risk of electrical shock when unit is used.
Page 3
10. Do not use unit where aerosol-based products are being used, or where oxygen is being administered. 11. Unit is only meant to be used with recommended Compact Fabric Steamer model SF-440W accessories. Using other types of attachments may cause damage to unit or injury.
Product Information The following features and accessories are included with your Compact Fabric Steamer. Carefully inspect the packing material for all parts listed below. To obtain possible missing parts, refer to Product Support on Page 10 of this manual for Consumer Service contact information. UNIT FEATURES &...
Page 5
• The Steam Nozzle (1) emits the flow of hot, penetrating steam produced by the Boiler. • The Boiler Cap (2) is designed to safely contain steam inside the Boiler, while providing easy access to the Boiler’s fill hole. • The Handle (3) is designed to stay cool while providing maximum grip and comfort.
Using Your Compact Fabric Steamer FILLING BOILER WITH WATER 1. Place Compact Fabric Steamer on a flat, level surface. 2. Make sure power cord is unplugged from electrical outlet. 3. Remove Boiler Cap Cover by releasing latch. Then remove Boiler Cap. CAUTION: If unit has been in use, allow Boiler to cool (5 minutes for minimum cooling before removing Boiler Cap and adding water.
Page 7
FABRIC STEAMING CAUTION: When steaming any material for the first time, it is recommended that you test on a small inconspicuous area before proceeding. Do not use on synthetic fabrics such as 100% nylon or polyester, or other steam-sensitive materials. NOTE: Be sure that Boiler has already been filled and any desired accessories are connected before following these steps (refer to Page 6 for details).
Storage & Care PROPER STORAGE Preparing your Compact Fabric Steamer for storage is quick and simple. When you have finished your steaming tasks, follow the steps listed below. 1. Unplug power cord from electrical outlet. 2. Allow unit to cool (15 minutes for complete cooling). 3.
For problems with your Compact Fabric Steamer, please refer to the troubleshooting guide located above. Additional inquiries should be directed to our consumer support services through our Web site, www.steamfast.com. If you do not have internet access, you may also contact our Consumer Service Department by telephone, at 1-800-711-6617.
When ordering replacement or optional accessories for your Compact Fabric Steamer, you may refer to the part numbers below. Accessories may be ordered through our Web site: www.steamfast.com You may also contact Consumer Service directly: consumerservice@steamfast.com or 1-800-711-6617 FABRIC BRUSH A440-001 LINT REMOVER A440-002 NOTE: Due to continuing improvements, part numbers listed above may change.
(1) year from the date of purchase when used and maintained in accordance with the Owner’s Guide (the “Warranty Period”). In the event Buyer notifies Steamfast of a defect in the Product within the Warranty Period, Steamfast will replace the Product and/or defective component parts, as applicable and necessary. Any such re-...
Page 12
All such fees and costs shall be the sole responsibility of Buyer. Please allow at least 1-2 weeks for return of the Product after it is received by Steamfast. For ease of recordkeeping, it is recommended that Buyer staple or attached the original sales receipt to this Own- er’s Guide and record the Product serial number (located on the Product specifications decal) here:...
Need help?
Do you have a question about the SF-440W and is the answer not in the manual?
Questions and answers