Page 1
20V Lithium-Ion Impact Driver 241-0418 For questions/comments, technical assistance or repair parts – Please call toll free: 1-866-917-4374 (M – F 8am – 6pm EST) OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These...
SAFETy SyMbOLS Some of these following symbols may be used on this tool . Please study them and learn their meaning . Proper interpretation of these symbols will allow you to operate the tool better and more safely . Symbol Designation / Explanation Name Volts...
SAFETy INSTRUCTIONS The purpose of safety symbols is to attract your attention to possible dangers . The safety symbols and the explanations with them deserve your careful attention and understanding . The symbol warnings do not, by themselves, eliminate any danger . The instructions and warnings they give are no substitutes for proper accident prevention measures .
SAFETy INSTRUCTIONS 4. Do not abuse the cord. Never use the WARNING: Read all safety cord for carrying, pulling or unplugging the warnings and instructions! power tool . Keep the cord away from heat, Failure to follow the warnings and instructions oil, sharp edges or moving parts .
Page 6
SAFETy INSTRUCTIONS 6. Dress properly. Do not wear loose 6. Keep cutting tools sharp and clean. clothing or jewelry . Keep your hair, clothing Properly maintained cutting tools with sharp and gloves away from moving parts . Loose cutting edges are less likely to bind and are clothes, jewelry or long hair can be caught in easier to control .
Page 7
SAFETy INSTRUCTIONS SPECIFIC SAFETy RULES FOR 9. Secure the material being fastened. Never hold it in your hand or across your CORDLESS IMPACT DRIVER legs . Unstable support can cause loss of control and injury . 1 . Use only the batteries and chargers listed 10.
ASSEMbLy CONTENTS 3 . Inspect the tool carefully to make sure that no breakage or damage occurred during shipping . Impact Driver, 2 bits, manual 4 . Do not discard the packing material until you have carefully inspected and UNPACKING satisfactorily operated the tool .
Page 10
OPERATION TRIGGER SWITCH (FIG. 3) DIRECTION-OF-ROTATION SELECTOR (FORWARD/CENTER- FIG. 3 LOCK/REVERSE) (FIG. 4) FIG. 4 Variable Direction- Speed of-Rotation Forward Reverse Trigger Selector Switch To turn the Impact Driver ON, depress the trigger switch . To turn it OFF, release the trigger switch . The direction of rotation is reversible and is controlled by a selector located above the trigger switch .
Page 11
OPERATION LED WORKLIGHT (FIG. 5) REMOVING THE bELT CLIP FIG. 5 1 . Use a screwdriver to loosen the screw Worklight that attaches the belt clip to the driver . 2 . Remove the screw and the belt clip . bIT STORAGE (FIG.
Page 12
OPERATION INSTALLING bITS (FIG. 8) REMOVING bITS (FIG. 8) FIG. 8 WARNING: Use protective gloves when removing the bit from the tool, or first allow the bit to cool down . The bit may be hot after prolonged use . 1 .
MAINTENANCE WARNING: WARNING: To avoid serious To reduce the risk personal injury, always remove the of personal injury and damage, never battery pack from the tool when cleaning immerse your tool, battery pack or or performing any maintenance. Never charger in liquid or allow a liquid to flow disassemble the power source, battery inside them.
This MASTERFORCE® brand power tool carries our famous No Hassle 3-Year Limited Warranty to the original purchaser . If, during normal use, this MASTERFORCE® power tool breaks or fails due to a defect in material or workmanship within three (3) years from the date of original purchase, simply bring this tool with the original sales receipt back to your nearest MENARDS®...
Need help?
Do you have a question about the 241-0418 and is the answer not in the manual?
Questions and answers