Related Manuals for Petsafe pawz away PWF00-13665
Summary of Contents for Petsafe pawz away PWF00-13665
- Page 1 Model Number PWF00-13665 pawz away ® mini pet barrier operating and training guide Please read this eNtire guide beFore begiNNiNg...
- Page 2 Important Safety Information Explanation of Attention Words and Symbols used in this guide This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
- Page 3 • To prevent an unintended correction, do not perform set up procedures while the Receiver Collar is on your pet. • If you are using a collar and leash for training, be sure the extra collar does not put pressure on the Contact Points of the Receiver Collar. www.petsafe.net...
-
Page 4: Table Of Contents
Customer Care Center at 1-800-732-2677. To get the most protection out of your warranty, please register your product within 30 days at www.petsafe.net. By registering and keeping your receipt, you will enjoy the product’s full warranty and should you ever need to call the Customer Care Center, we will be able to help you faster. -
Page 5: Components
Barrier Transmitter • Drill and Receiver Collar (3 AAA Batteries not included) mounting (2) 3-V Lithium hardware Batteries for Receiver Collar • Non-metallic collar and leash • Scissors • Lighter Test Light Tool Operating and Cat Collar Strap Training Guide www.petsafe.net... -
Page 6: How The System Works
Barrier Area, he’ll hear a series of audible tones from the Receiver Collar and he will feel a safe Progressive Static Correction, delivered through the Contact Points on his neck. The Progressive Static Correction will get his attention, but will not cause harm. The correction continues until your pet leaves the Barrier Area. The PetSafe Pawz Away Mini Pet Barrier has been ®... -
Page 7: Operating Guide
3. Each segment represents approximately 5 inches from the unit. You can create a Barrier Area of 5 inches to 30 inches from the unit. Using the (+) and (-) buttons, adjust the range to fit the desired pet Barrier Area. www.petsafe.net... -
Page 8: Test The Barrier Area
2. Hold the Receiver Collar with the Contact Points facing up. Place the Test Light Tool on the Contact Points so that the wire in the Test Light Tool touches the Contact Points (3A). The PetSafe logo on the Receiver Collar should face the Transmitter. -
Page 9: Fit The Receiver Collar On Your Pet
1. Using the edge of the Test Light Tool, turn the battery door to the OFF position. 2. Start with your pet standing comfortably (4A). 3. Place the Receiver collar on your pet so that the PetSafe logo is facing your pet’s chin. Center ®... -
Page 10: To Re-Thread The Collar
4. Adjust the tightness of the Receiver Collar to fit your pet’s neck. Check the tightness of the Receiver Collar by inserting one finger between the end of a Contact Point and your pet’s neck. The fit should be snug but not constricting (4B). -
Page 11: Receiver Collar Batteries
CR2032. Replacement batteries can be found at many retailers or through the Customer Care Center. Contact the Customer Care Center at 1-800-732-2677 or visit our website at www.petsafe.net to locate a retailer near you. To replace the batteries: 1. Using the edge of the Test Light Tool, turn the battery door to the OPEN position. -
Page 12: Additional Features
Barrier Area. Once your pet leaves the Barrier Area, the Receiver Collar resets itself and will deliver a Progressive Static Correction the next time your pet enters the Barrier Area. Mode A, B, and AB Feature For multiple pet households, additional PetSafe Pawz Away Receiver Collars can be purchased to work with one or ®... - Page 13 Barrier Transmitter set to mode B. Barrier Barrier Transmitter Transmitter When the Barrier Transmitter is set to mode AB, the Barrier Transmitter denies access to all pets wearing the Receiver Collar, no matter which mode the receiver is programmed to. Barrier Transmitter www.petsafe.net...
-
Page 14: Programming The Mode Settings
Programming the Mode Settings All programming is done through the Barrier Transmitter and the programming is synchronized with the Receiver Collar. The Receiver Collar cannot be programmed separately from the Barrier Transmitter. You may synchronize multiple Receiver Collars to a single Barrier Transmitter at one time. However, make sure any Receiver Collar you do not wish to synchronize is turned OFF during the programming procedure. - Page 15 5. Once the Receiver Collar has been programmed, press the (+) button to turn the Barrier Transmitter ON. Check to make sure the black bar(s) appear on the LCD screen indicating the mode you have selected (5B) and reset the Barrier Transmitter to the desired range. Mode A Mode B Mode AB www.petsafe.net...
-
Page 16: Training Guide
Training Guide The PetSafe Pawz Away Mini Pet Barrier operates on the principle of positive and negative reinforcement. Your pet ® ® will learn to avoid the Barrier Areas you have set after receiving a Progressive Static Correction (negative reinforcement) and your pet will learn that he is more comfortable when he avoids the Barrier Areas (positive reinforcement). -
Page 17: Additional Information
Pawz Away Mini Pet Barrier, contact the Customer Care Center at ® ® 1-800-732-2677 or visit our website at www.petsafe.net to locate a retailer near you. Component Part Number Battery – 3 Volt Lithium (two pack - size CR2032) RFA-35-11... -
Page 18: Troubleshooting
Troubleshooting Barrier Transmitter does not • Check segment indicator on Barrier Transmitter. appear to work. • Check/replace batteries in Barrier Transmitter. • Increase the Barrier Area range on the Barrier Transmitter. • Check that the Barrier Transmitter setting corresponds to the Receiver Collar setting. (i.e. Barrier Transmitter is set to mode A and Receiver Collar is synchronized to pick up mode A)—refer to Additional Features section beginning on page 12 for instructions. -
Page 19: Terms Of Use And Limitation Of Liability
Product. Buyer assumes all risks and liability from the use of this Product. 5. Modification of Terms and Conditions Radio Systems Corporation reserves the right to change the terms, conditions and notices under which ® this Product is offered. www.petsafe.net... -
Page 20: Compliance
Compliance FCC/Canada This Class B digital apparatus complies with Canadian ICES-003. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. -
Page 21: Customer Care International
Monday - Friday 10:30 AM - 7 PM This product has the benefit of a limited manufacturer’s warranty. Details of the warranty applicable to this product and its terms can be found at www.petsafe.net and/or are available by sending a stamped addressed envelope to PetSafe Ltd. - Page 22 One Year Non-Transferrable Limited Warranty What is covered: Radio Systems Australia Pty Ltd (hereinafter referred to as “Radio Systems”) warrants to the original retail purchaser, and not any other purchaser or subsequent owner, that its Product, when subject to normal and proper residential use, will be free from defects in material or workmanship for a period of one (1) year from the purchase date.
- Page 23 Should you have any queries or require any further information, please contact our Customer Care Centre on 1800 786 608 (Australia) or 0800 543 054 (New Zealand). www.petsafe.net...
- Page 24 Radio Systems Corporation ® 10427 PetSafe Way Knoxville, TN 37932 1-800-732-2677 www.petsafe.net Protected by US Patents 7,046,152; 7,068,174; 7,117,822; 7,204,204; 7,278,376; 7,495,570. 400-028/1 ©2013 Radio Systems Corporation...
Need help?
Do you have a question about the pawz away PWF00-13665 and is the answer not in the manual?
Questions and answers