Advertisement
2. Getting to Know Your Package
1
WiFi PODZ
2
Battery Booster and Cable
3. Getting Started
Please connect your Air Pro with PC or Mac to update firmware in order to
activate the WiFi function. For details of firmware update, please refer to
section 3.1 of your camera quick start guide
3.1 Install your WiFi PODZ
1. Remove the PODZ and put your WiFi PODZ to the camera PODZ socket
2. Seal the camera by rotating the back cover clockwise until two dots are aligned.
Slide the latch to lock the PODZ
3. Press and hold
4. Press the WiFi power button on the WiFi PODZ to turn on
your WiFi. The blue LED lights up to indicate the WiFi is
warming up. It will take around 15-20 seconds for the WiFi
to warm up and become connectable. The LED will flash
TM
button to turn on your camera
Provide the wireless capability to your ion
cameras
Allow to fully charge your camera from
empty via the USB cable during your travel
Advertisement
