Summary of Contents for Kapture.net DVR -CCT700
- Page 1 CCT700 - DVR Kapture.net Stand-alone Quad Digital Video Recorder User’s Manual Kapture.net - 1 -...
-
Page 2: Table Of Contents
CCT700 - DVR Kapture.net CONTENTS 1. Introduction ·······························································································4 ¦ Features ································································································· 4 ¦ Main Functions ························································································ 5 ¦ Key parts ································································································ 7 2. Installation ·································································································9 3. Operating Method ··················································································11 ¦ Booting Up····························································································· 11 ¦ Live Mode ······························································································12 ¦ Recording ······························································································17 ¦... - Page 3 CCT700 - DVR Kapture.net WARNING Thank you for choosing the DVR, code CCT700. Before installation and use, please read and understand following instructions for your safety. ü Please install the product only in a suitable INDOOR location. ü Please install on a flat surface.
-
Page 4: Introduction
CCT700 - DVR Kapture.net 1. Introduction 1.1 Features ü ü Records 4 cameras simultaneously. No need for a multiplexer or timelapse. ü ü Easy to fit, all in one unit. Unattended recording. ü ü Easy to use - minimises call-backs. -
Page 5: Main Functions
CCT700 - DVR Kapture.net 1.2 Main Functions Records 4 simultaneous camera images on to the hard drive without the need of a VCR, quad, multiplexer or any video cassettes. With no cassettes to change or VCR to maintain, it’s easy to use and even easier to fit with everything built into one unit. - Page 6 CCT700 - DVR Kapture.net How long can the hard disk record for without getting full? This will depend on the number of cameras used, the quality setting of the recorder and its refresh rate (ie, how many frames per second are recorded.) Typically with the 40gb hard drive supplied and using 4 cameras, in an almost real time recording, you can achieve approx.
-
Page 7: Key Parts
CCT700 - DVR Kapture.net 1.3 Key Parts The Front side ENTER Enter SETUP mode or select item Cancel selection or return to previous item Move cursor up/down/left/right Direction Recording / Recording stop Zoom the specific area in ZOOM the screen... - Page 8 CCT700 - DVR Kapture.net The Rear side Camera input Connect camera cable Monitor input Lan led Connect monitor cable Emit light when lan connection and working LAN port Connect Lan cable Sensor led Emit light when sensor in Sensor in/out...
-
Page 9: Installation
CCT700 - DVR Kapture.net 2. Installation CCT700 Kit Includes: 1) 1 x CCT700 DVR 2) Power cable 3) User’s manual and software on CD Main Installation Stages The Rear Side 2) Monitor Output 3) Sensor IN / OUT 1) Camera... - Page 10 CCT700 - DVR Kapture.net Network connection and serial cable connection 1) RS232C serial connection RS232C 9pin 9pin Female Female 2) Modem (PSTN) connection PSTN TEL. line RS232C TEL. line External Modem 25pin 9pin Female Male 3) LAN connection Use cross cable when direct connection between PC and DVR using LAN cable.
-
Page 11: Operating Method
CCT700 - DVR Kapture.net 3. Operating Method. 3.1 Booting Up When the system is booting, the following screen is displayed. PLEASE WAIT VIDEO INITIALIZE NTSC QUAD INITIALIZE ENCODER INITIALIZE DECODER INITIALIZE RTC INITIALIZE VOICE INITIALIZE LAN INITIALIZE NONE SYSTEM BIOS VERSION 20011008-20010928 STARTING SYSTEM…... -
Page 12: Live Mode
CCT700 - DVR Kapture.net 3.2 Live Mode Operating ? You can display all 4 cameras at once or 1 full screen ? Auto Switch, Freeze, Zoom mode. ? Current time, camera name, and system status (i.e., Recording, Zoom, Freeze, Sensor) is displayed on the screen. -
Page 13: Quad Screen
CCT700 - DVR Kapture.net Quad Screen - By pressing the Quad button the CCT700 will display all 4 cameras in a quad screen. The icons on the screen are defined as below HDD-Status bar Displays used quantity of HDD Current time Displays current time 2001. - Page 14 CCT700 - DVR Kapture.net 1-Channel Screen - By pressing any of the 4 camera display buttons, a 1-channel screen is displayed. Displays current time SWITCHING Current time Displays switching on/off 2000. 01. 01. 12:34:56 Sensor In/Out Displays Sensor status CAMERA 1...
- Page 15 CCT700 - DVR Kapture.net Operation Freeze screen Auto Switching Zoom Cancel Direction Screen AUTO FREEZE QUAD DISPLAY ZOOM ENTER ESC Each Camera Enter / Quad screen Setup Screen Auto Switching (1-Channel screen mode only) By pressing the AUTO button in the 1-channel screen mode, the auto sequencer is activated the dwell time can be configuration in SETUP mode.
- Page 16 CCT700 - DVR Kapture.net formatted, the HDD-status bar is not displayed. 3) When ‘Auto delete’ is activated, recording is possible even though HDD is full. In this mode when the hard disk is full and the HDD-status bar is displayed red, only recording location of the HDD is marked white.
-
Page 17: Recording
CCT700 - DVR Kapture.net 3.3 Recording Operating There are 4 methods of activating recording. 1- Manually by pressing the REC button Scheduled timed recording, like a domestic VCR By alarm activation using the alarm inputs. By the Video Motion Detection built in to the unit... -
Page 18: Playback
CCT700 - DVR Kapture.net 3.4 Playback of Recordings Operating If you have recorded some video information, by pressing the PLAY button you are taken to a screen that allows you to select the date and time from which you would like to start playing back from. - Page 19 CCT700 - DVR Kapture.net 1. Setting the Playback start time PLAY START FROM 2000. 01. 01. 00:00:00 RECORDED FROM 2000. 01. 01. 00:00:00 2000. 01. 01. 12:34:56 ? To select the PLAY start time EITHER Select the exact Date and Time.
-
Page 20: Setup
CCT700 - DVR Kapture.net 4. Set Up Operation The System Set up is accessed via the set up button. To get to the set up screen itself, you need to enter the system password. It is very important that before you record anything you make sure that you set the correct date and time prior to recording. - Page 21 CCT700 - DVR Kapture.net Input Your Password INPUT YOUR PASSWORD PASSWORD : USING DISPLAY KEY INPUT 8-DIGIT PASSWORD You must input a password to enter SETUP mode. The password is composed of 8 digit number consisting of digits between 1-4.
- Page 22 CCT700 - DVR Kapture.net Set Up Menu The SETUP mode is composed of three parts, SYSTEM, CAMERA, RECORD. By pressing ENTER at any part, a sub menu is displayed. SETUP SYSTEM CAMERA RECORD To select a sub menu, - Using the up/down arrow keys, select the menu required.
-
Page 23: System Configuration
CCT700 - DVR Kapture.net 4.1 System Configuration 4.1.1 SYSTEM ID SYSTEM SYSTEM ID TIME SET COMMUNICATION DISK INFO ALARM LIST CHANGE PASSWORD DIGITAL OUTPUT SET If you are using several systems at the same time, you can set a unique id for each one. This would be important if you have several CCT700s on the same LAN. - Page 24 CCT700 - DVR Kapture.net 4.1.2 SETTING THE TIME SYSTEM SYSTEM ID TIME SET COMMUNICATION DISK INFO ALARM LIST TIME SET CHANGE PASSWORD DIGITAL OUTPUT SET TIME DISPLAY CURRENT TIME SET 2001. 07. 06. 09:00 FRI TIME DISPLAY You can set the system up to display or hide the current date and time. The default setting is ON.
- Page 25 CCT700 - DVR Kapture.net 4.1.3 COMMUNICATION SYSTEM SYSTEM ID TIME SET COMMUNICATION DISK INFO ALARM LIST CHANGE PASSWORD COMMUNICATION DIGITAL OUTPUT SET BAUD RATE 1152 SERIAL DEVICE PAN/TILR PROTOCOL BAUD RATE This sets up the speed of serial communication. The two figures, '00' at the end of the displayed value are omitted.
- Page 26 CCT700 - DVR Kapture.net IP ADDRESS Select a suitable IP address to be used by LAN networking. IP address es must be between 0 and 255. If you select a value out of this range a warning message, "SELECT VALUE BETWEEN 0 AND 255", is displayed.
-
Page 27: Alarm List
CCT700 - DVR Kapture.net If disk is not installed : NO DISK If disk is not formatted : UNFORMATTED If disk is in Use : ratio of used disk storage to total disk storage. If the unit has been set up to continuously record when the disk is full, the first data on the disk will be automatically erased with new data. - Page 28 CCT700 - DVR Kapture.net 4.1.6 CHANGE PASSWORD SYSTEM SYSTEM ID TIME SET COMMUNICATION DISK INFO CHANGE PASSWORD ALARM LIST CHANGE PASSWORD CURRENT PASSWORD -------- DIGITAL OUTPUT SET NEW PASSWORD -------- NEW PASSWORD AGAIN -------- Changing the current password to a new password.
- Page 29 CCT700 - DVR Kapture.net 4.1.7 DIGITAL OUTPUT SET SYSTEM SYSTEM ID TIME SET COMMUNICATION DISK INFO DIGITAL OUTPUT SET ALARM LIST CHANGE PASSWORD SENSOR DIGITAL OUTPUT SET BUZZER TIME OUTPUT TIME When the sensor is set to ON, the buzzer is enabled and the digital output port works. The LED on the rear of the unit will be illuminated to confirm this feature is activated.
-
Page 30: Camera Configuration
CCT700 - DVR Kapture.net 4.2 CAMERA CONFIGURATION 4.2.1 INSTALLED CAMERA CAMERA INSTALLED CAMERA CC-- CAMERA 1 NAME STREET CAMERA 2 NAME DOOR CAMERA 3 NAME DESK 1 CAMERA 4 NAME DESK 2 CAMERA NAME DISPLAY SWITCHING TERM This is used to set up which channels have cameras on them and whether they are colour or B&W. - Page 31 CCT700 - DVR Kapture.net 4.2.2 CAMERA NAME CAMERA INSTALLED CAMERA CC-- CAMERA 1 NAME STREET CAMERA 2 NAME DOOR CAMERA 3 NAME DESK 1 CAMERA 4 NAME DESK 2 CAMERA NAME DISPLAY SWITCHING TERM This is used to set up individual camera names to be displayed on screen.
-
Page 32: Record Configuration
CCT700 - DVR Kapture.net 4.3 RECORD CONFIGURATION RECORD RECORD FRAME QUALITY AUTO DELETE RECORD ON BOOT UP MOTION DETECTION SENSOR TIMEOUT RESERVED RECORDING 4.3.1 RECORD FRAME Sets the frame rate of recording from 1 to 25. The default is 25. (30 for NTSC). -
Page 33: Motion Detection
CCT700 - DVR Kapture.net 4.3.5 MOTION DETECTION RECORD RECORD FRAME QUALITY MOTION DETECTION AUTO DELETE RECORD ON BOOT UP MOTION DETECTION SENSITIVITY NONE SENSOR TIMEOUT RESERVED RECORDING CONTINUE TIME Video Motion Detection is built in to the CCT700. ? The sensitivity for this can be set to; "VERY LOW", "LOW", "MEDIUM", "HIGH", "VERY HIGH". - Page 34 CCT700 - DVR Kapture.net 4.3.7 RESERVED RECORDING RESERVED RECORDING WEEKDAYS ON 00:00 - 00:00 SATURDAY ON 00:00 - 00:00 SUNDAY 00:00 - 00:00 SPECIFIC DAYS This is used to set up automatic recording by date and time during the week.
- Page 35 CCT700 - DVR Kapture.net 4.3.8 SPECIFIC DAYS SPECIFIC DAYS 1 : ON 00. 00. 00:00 - 00. 00. 00:00 2 : ON 00. 00. 00:00 - 00. 00. 00:00 3 : ON 00. 00. 00:00 - 00. 00. 00:00 4 : ON 00.
-
Page 36: Quick Guide To The Set Up Menu
CCT700 - DVR Kapture.net Quick Guide to the SET UP menu SETUP SYSTEM SYSTEM ID TIME SET TIME DISPLAY CURRENT TIME SET COMMUNICATION BAUD RATE SERIAL DEVICE PAN/TILT PROTOCOL DISK INFO FORMAT GATEWAY ALARM LIST SUBNET MASK CHANGE PASSWORD PORT... -
Page 37: Networking
CCT700 - DVR Kapture.net 5. NETWORKING OPERATION The CCT700 is network friendly. It has a built in Ethernet card and can be connected into most computer networks that use the IP protocol. The CCT700 has an automatic bandwidth restriction to help prevent it hogging a network. -
Page 38: Dvr Ethernet' Program For Lan
CCT700 - DVR Kapture.net 5.1 Host Program “DVR ETHERNET” for LAN 1) Start Microsoft Windows 2000/98/ME, and put the Software CD into PC CD drive. 2) Execute the SETUP.EXE in “DVR Ethernet” folder and click the NEXT button on this screen. - Page 39 CCT700 - DVR Kapture.net 4) Select location to install, and then click the NEXT button. 5) Select the location to make the “start-program”. - 39 -...
- Page 40 CCT700 - DVR Kapture.net 6) Confirm the information and then click the NEXT button. Installation then starts.. 7) When the install routine has finished a program group “DVR ETHERNET” and execution file “DVRETHERNET.EXE ” is automatically formed. - 40 -...
- Page 41 CCT700 - DVR Kapture.net 5.1.1 Setting up the DVR ETHERNET Setting up the IP ADDRESS ? Click the "Remote" menu and the screen below is displayed. ? Set the name of the remote DVR at "REMOTE NAME" item, e.g. Stores etc…...
- Page 42 CCT700 - DVR Kapture.net 5.1.2 Transmission method through a LAN using "DVR ETHERNET” Preparing for transmission ? Make sure you have a suitable LAN and have correctly installed "DVRETHERNET.EXE". ? If you are not qualified to work on LANs, please contact your IT department.
- Page 43 CCT700 - DVR Kapture.net Transmitting the LIVE image. ? Clicking the "Live Mode" button the images will be displayed on the PC screen. ? During the transmission the "Live Mode" button is changed to a "Stop" button. Clicking this, stops transmission.
- Page 44 CCT700 - DVR Kapture.net Transmitting recorded image ? By clicking the "Replay Mode" button, the playback time & date options are displayed. RECORD START TIME AND END TIME IN THE REMOTE DVR PLAY PAUSE PLAY SPEED START TIME STOP ? Select the replay start time and press the "PLAY" button, playback will start. Press the "PAUSE" button during playback and playback will be paused.
- Page 45 CCT700 - DVR Kapture.net Capture image ? Click the right button of the mouse on each camera screen that you want to capture. ? By clicking Capture, you will capture the image that is on screen. ? T he c aptured image is saved in selected directory (See ‘Setting up the DVR ETHERNET’ section) as ‘c#_YYYY_MM_DD hh-mm-ss’...
-
Page 46: Dvr Dialup' Program For Serial Port, Modem
CCT700 - DVR Kapture.net 5.2 Host Program “DVR DIALUP” for Serial port and Modem 1) Start Microsoft Windows 2000/98/ME, and put the Software CD into PC CD drive. 2) Execute the SETUP.EXE in “DVR DIALUP” folder and click NEXT button in this screen. - Page 47 CCT700 - DVR Kapture.net Select the location to install and then click the NEXT button. Select the location for the program. - 47 -...
- Page 48 CCT700 - DVR Kapture.net Confirm the information and then click the NEXT button. Installation starts … When the installation has finished please click the “Finish” icon. - 48 -...
- Page 49 CCT700 - DVR Kapture.net 5.2.1 Setting up DVR Dial Up. ? By clicking “Communication” (a sub menu of the “Setup” menu) you can set up the DEVICE and BAUD RATE. If you are dialing up using a modem, select the name of the modem installed in your PC. In cases of serial communication, select the port.
- Page 50 CCT700 - DVR Kapture.net 5.2.2 Transmission, save, print image through serial port connection. Preparation ? Ensure your network and cabling is correct and execute "DvrDIALUP.EXE". ? Referring to the previous instructions on setting up “DVR DIALUP ”, "DEVICE" and "BAUD RATE". In the status bar an "online"...
- Page 51 CCT700 - DVR Kapture.net ? Clicking the “Print” button (sub menu of “File” menu) You can print a specific frame. ? Clicking the “Print Setup” (sub menu of “File” menu) You can set up the print options. Transmission, save, and print a live image.
- Page 52 CCT700 - DVR Kapture.net 5.2.3 Transmission, save, print image through MODEM Preparing for transmission ? Ensure that your modem is installed correctly, and execute "DvrDIALUP.EXE". ? Referring to the previous section, set up “DVR DIALUP", "DEVICE" and "BAUD RATE". In the status bar a message "online"...
-
Page 53: Specifications
CCT700 - DVR Kapture.net 6. Specifications System DVR-CCT700 Operation type Stand-alone, Self operation system Save Max 4 EA available Camera input Video output 1CH (NTSC/PAL) (NTSC/PAL) 320 × 240, 640 x 480, true color Resolution Recording 25fps, MAX 100fps, Available for change... -
Page 54: Recording Table
CCT700 - DVR Kapture.net 7. Recording Table 40GB 347 h 115 h 69 h 34 h 23 h 13.2 h 80GB 694 h 230 h 138 h 68 h 46 h 26.4 h 120GB 1388 h 460 h 276 h... -
Page 55: Appendix
CCT700 - DVR Kapture.net 8. APPENDICES 8.1 Selection of NTSC/PAL User can select NTSC/PAL type by setting the jumper. This is not necessary except in special cases. Rear CAMERA IN MONITOR OUT POWER NTSC BATT1 Front - 55 -... -
Page 56: Installation Of Additional Hdd
CCT700 - DVR Kapture.net 8.2 Installation of additional HDDs Embedded HDD A 40 GB HDD is already installed in the CCT700. Up to 4 HDD can be installed including the one already in the unit. New hard drives need to be formatted before use. - Page 57 CCT700 - DVR Kapture.net 4) Connect data cable and power cable to additional HDD. ? Set up master/slave of HDD using the jumper setting. ? Connect cables as shown. The rear side The front side Power Cable Data Cable HDD1...
-
Page 58: Pan/Tilt, Zoom, Focus
CCT700 - DVR Kapture.net 8.3 Pan/Tilt, Zoom, Focus 1) You can use the CCT700 to remotely control cameras that have PAN / TILT / ZOOM facilities. 2) This function is only possible if the camera has a built-in pan/tilt receiver with one of the following supported protocols: ? CNB SMART PTZ, ? SAERIM SSR-100, ? PELCO D PROTOCOL. -
Page 59: Troubleshooting
CCT700 - DVR Kapture.net Troubleshooting Quick Reference Continuous warning sound, “beep~” If a camera cable is unplugged from the CCT700, a continuous beep will sound. If sensors are set up but then removed, then a beep will sound. Blank screen (or Shaking screen). - Page 60 - 60 -...