Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for B&G V90
Summary of Contents for B&G V90
- Page 1 Installation Manual ENGLISH bandg.com...
- Page 3 (Documentation) may be translated to, or has been translated from, another language (Translation). In the event of any conflict between any Translation of the Documentation, the English language version of the Documentation will be the official version of the Documentation. V90 Installation Manual...
- Page 4 MMSI and license information You must obtain a user Maritime Mobile Service Identity (MMSI) and enter it into your V90 radio in order to use the DSC functions. Similarly for the Automatic Transmitter Identification System (ATIS) MMSI. Contact the appropriate authorities in your country. If you are unsure who to contact, consult your B&G dealer.
-
Page 5: Fcc Statement
Connect the equipment into an output on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced technician for help. • A shielded cable must be used when connecting a peripheral to the serial ports. V90 Installation Manual... - Page 6 This ISM device complies with Canadian ICES-001. Maintain a minimum separation of 2.5 cm (1 inch) from the face. Cet appareil ISM est conforme à la norme NMB-001 du Canada. Maintenir une distance minimum de 2,5 cm (1 inch) de la surface. V90 Installation Manual...
- Page 7 Important safety information Read carefully before installation and use Warning: Indicates a potentially hazardous situation that could result in death or serious injury. Caution: Indicates a potentially hazardous situation that could result in minor or moderate injury. V90 Installation Manual...
-
Page 8: Table Of Contents
Installing a wired handset cradle Installing a handset cable connector External speakers installation options Transceiver external connectors Transceiver internal connectors Setting up the radio NMEA 2000 Network NMEA 2000 Network Diagram Appendix 1 - Accessories Contents | V90 Installation Manual... -
Page 9: About This Manual
About this manual This manual describes the installation of the B&G V90 marine VHF radio. For instructions on operating the radio, please see the separate manual: B&G V90 Marine VHF Radio Operating Manual. This manual is organized as follows: •... -
Page 10: System Overview
System Overview Introduction The B&G V90 VHF radio is a comprehensive solution for marine VHF radio applications. The radio comprises: • V90 VHF transceiver • One wired handset as standard, and optionally up to 3 more wired handsets. (Maximum of 4 wired handsets in total) •... -
Page 11: System Overview Diagram
System overview diagram 12 VDC | 11 System Overview | V90 Installation Manual... -
Page 12: Preparation
Digital Selective Calling (DSC) function of this radio. Consult your local maritime authority or radio spectrum authority to obtain your MMSI. Checklist The following items are included in the V90 radio package: Wired handset • H90 wired handset with cradle •... - Page 13 • Declaration of Conformity document (where applicable) ¼ Note: A VHF antenna is not provided by B&G. An antenna with a PL259 plug is required. Consult your B&G dealer for advice if required. | 13 Preparation | V90 Installation Manual...
-
Page 14: Installation
Drill the 4 holes where marked with a drill bit suited to the selected mounting fasteners. Attach the transceiver using the supplied selftapping screws or pan head machine screws. 14 | Installation | V90 Installation Manual... - Page 15 211.2 mm (8.31”) 195.1 mm (7.68”) | 15 Installation | V90 Installation Manual...
-
Page 16: Installing A Wireless Handset Cradle
2 x M3.5 selftapping screws • Bottom hole 1 x M3 x 40 mm machine screw, nut and washers, or 1 x 3 mm x 40 mm selftapping screw. 16 | Installation | V90 Installation Manual... -
Page 17: Installing A Wired Handset Cradle
1 x M3 x 40 mm machine screw, nut and washers, or 1 x 3 mm x 40 mm selftapping screw. 69.0 mm 20.0 mm (2.72”) (0.79”) 2 x 5.0 mm (0.20”) holes 1 x 3.5 mm (0.14”) hole | 17 Installation | V90 Installation Manual... -
Page 18: Installing A Handset Cable Connector
Each wired handset cable includes a connector assembly that must be installed in a bulkhead, dashboard or other suitable panel. Socket body Mounting surface Bezel Drill 24 mm diameter hole to clear socket body Connector cover 18 | Installation | V90 Installation Manual... -
Page 19: External Speakers Installation Options
Refit the plastic trim pieces. Fasteners • 4 x M3 x 10 mm machine screws, spring washers, flat washers and M3 nuts, or • 4 x M3 x 10 mm selftapping screws. | 19 Installation | V90 Installation Manual... - Page 20 Replace the plastic trims. Fasteners • 4 x M3 x 40 mm machine screws, spring washers, flat washers and M3 nuts, or • 4 x 3 mm x 40 mm selftapping screws. Box drain hole 20 | Installation | V90 Installation Manual...
-
Page 21: Transceiver External Connectors
Always mount the VHF antenna as high as possible and at least 1 m (39 inches) from the transceiver. NMEA 2000 (N2K) connector The V90 radio can be connected to an NMEA 2000 network using a cable (not supplied). For further information, see “NMEA 2000 Network” on page 26. - Page 22 22 | Installation | V90 Installation Manual...
- Page 23 Connectors 3, 4, 5 and 6 - Wired handsets Number Label Wire color Black TX/RX_A Blue TX/RX_B Green POWER-SW White Grey MIC_AF- Yellow MIC_AF+ Orange ¼ Note: All the necessary wires are included in the handset cable supplied. | 23 Installation | V90 Installation Manual...
- Page 24 HORN Wire to horn button Not connected Not connected ¼ Notes: • Use a normally-open horn button. • A GPS source is required to enable full functionality of DSC calling, especially DISTRESS calls. 24 | Installation | V90 Installation Manual...
- Page 25 Use a 4-8 ohm speaker or loud hailer horn rated at no less than 30 W. Higher impedance will reduce audio output volume. Connector 11 - programming connector This is a Micro-USB receptacle used for factory diagnostic purposes. | 25 Installation | V90 Installation Manual...
-
Page 26: Setting Up The Radio
¼ Note: You must enter your User MMSI before the DSC functions of this radio will work. See the Setup section in the V90 Operating Manual for full setup details. NMEA 2000 Network The radio can be connected to an NMEA 2000 network using an NMEA 2000 compliant cable (not supplied). -
Page 27: Nmea 2000 Network Diagram
NMEA 2000 Network Diagram STBY AUTO MARK GOTO MENU PAGES 12 VDC | 27 Installation | V90 Installation Manual... -
Page 28: Appendix 1 - Accessories
Appendix 1 - Accessories Part number Description 000-11677-001 H90 handset and speaker kit 000-11678-001 V90 BB VHF AIS RX ONLY 000-11679-001 H90 handset 000-11680-001 S90 external speaker 000-10791-001 H50 wireless handset 000-11727-001 20 m extension cable for handset 28 |... - Page 29 1177...
Need help?
Do you have a question about the V90 and is the answer not in the manual?
Questions and answers