Advertisement
Nutrition Center
Parts and Accessories
On-Off-Reverse
Button
Locking Clip
Main Body
Hopper
Juicing Strainer
Guide
Drum
Nutrition Center Instructions
1
While the Omega Nutrition Center can extract juice from unpeeled fruits
and vegetables we recommend you thoroughly wash and peel your fresh
ingredients to remove accumulated chemicals.
2
Cut fruit or vegetables into small pieces (about 2 inches) so that juice may
be extracted more thoroughly.
3
Turn on the machine and let it run without interruption until all the juice
has been extracted.
4
If the juicer starts to vibrate slightly during operation, turn off the machine
and empty the drum set. Re-assemble and resume normal operation.
5
After placing the last pieces of fruit or vegetable into the hopper, keep the
machine running for a few seconds longer to ensure the machine has
extracted the last drops of juice.
6
Switch off machine.
7
Clean drum set after each use of the Omega Nutrition Center.
8
Do NOT run the machine for more than 30 minutes at a time.
3
for juicing
Sieve
Food
pusher
for mincing/
chopping
Collection Bowl
Cleaning Brush
Juicing
Nozzle
(small)
Mincing
Nozzle
Blank
(large)
Round
Nozzle
Flat
Nozzle
Screw
Drum Cap
Nutrition Center
Assembly Instructions
1
Place the screw into the drum.
Insert the juicing strainer into the
drum. Place the drum cap onto the
drum end and turn it counter-clock-
wise until it clicks firmly into place.
2
Adjust the juicing or mincing nozzle
to
suit
the
material
being
processed. Refer to "How to
Choose the Right Nozzle" page 5.
3
Connect assembled drum set with
main body by turning lock clip
clockwise (about 60˚).
Place hopper onto guide.
4
Place juice bowl and waste bowl
under drum set. Plug power cord
into wall outlet.
5
Press the ON button. Place a few
pieces of cut fruit or vegetables,
one at a time into the guide. Use
the food pusher to press the fruit
or vegetables gently down the
guide. Leave the machine on as
you feed in the fruits/vegetables.
CONTINUED...
4
Advertisement
