1. Manuals
  2. Brands
  3. Cutter Manuals
  4. Scrubber
  5. SCX264
  6. Operating instructions manual

Cutter SCX264 Operating Instructions Manual

Walk behind scrubber
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
WALK BEHIND SCRUBBER
MODELS:
SCX264
10052380
SCX324
10052390
86039080 - BN 01/20/12
PRV NO. 98964
SCXC264
BSCSCX264
10052430
10052860
SCXC324
10052440
Read these instructions before using the machine
Lea las instrucciones antes de utilizar la máquina
Operating Instructions (ENG)
Instrucciones de funcionamiento (SPA)
IPX4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SCX264 and is the answer not in the manual?

Questions and answers

Related Manuals for Cutter SCX264

Summary of Contents for Cutter SCX264

  • Page 1 WALK BEHIND SCRUBBER Operating Instructions (ENG) Instrucciones de funcionamiento (SPA) MODELS: SCX264 SCXC264 BSCSCX264 10052380 10052430 10052860 SCX324 SCXC324 10052390 10052440 IPX4 Read these instructions before using the machine Lea las instrucciones antes de utilizar la máquina 86039080 - BN 01/20/12...

  • Page 2: Machine Data Log/Overview

    For the name and address of your dealer contact: Windsor Industries OVERVIEW The Saber Cutter is a battery powered, self-propelled, hard floor scrubber intended for commercial use. The appliance applies a cleaning solution onto a hard floor, scrubs the floor with brushes or pads, and then vacuums the soiled water back into the recovery tank.

  • Page 3: Table Of Contents

    Wiring-Battery ..........5-51 Charging the Batteries.......4-4 Wiring-Control Panel........5-53 Changing Batteries........4-5 Wiring-Main Harness ........5-55 Battery Connections........4-5 Wiring-Schematic-SCX264, SCX324..5-57 Squeegee Blades..........4-6 Wiring-Schematic-SCXC264, SCXC324 ..5-58 Adjusting Squeegee........4-6 Brake-Option..........5-59 Replace or Rotate Rear Squeegee Blade..4-6 Emergency Stop-Option ......5-61 Replace or Rotate Front Squeegee Blade.

  • Page 4: How To Use This Manual

    NOTE: If a service or option kit is installed on your machine, be sure to keep the KIT INSTRUCTIONS which came with the kit. It contains replacement parts numbers needed for ordering future parts. CUTTER 24V 86039080 04/17/07...

  • Page 5: Important Safety Instructions

    This appliance has been designed for use with the brushes specified by the manufacturer. The fitting of other brushes may affect its safety. Do not use on surfaces having a gradient exceeding 2% unless the optional parking brake is installed on the machine. SAVE THESE INSTRUCTIONS CUTTER 24V 86039080 04/17/07...

  • Page 6: Hazard Intensity Level

    Disconnect batteries before working on machine. Only qualified personnel should work inside machine. Always wear eye protection and protective clothing when working on or near batteries. Avoid skin contact with the acid contained in the batteries. WARNING Never allow metal to lie across battery tops. CUTTER 24V 86039080 04/17/07...

  • Page 7: Safety Label Location

    NOTE: These drawings indicate the location of safety labels on the machine. If at any time the labels become illegible, promptly replace them. SAFETY DECAL 86252530 PRV NO. 81494 BATTERY CAUTION 86252520 PRV NO. 80885 CIRCUIT BREAKER DECAL 86243530 SEE MANUAL PRV NO. 500565 2% GRADE WARNING CUTTER 24V 86039080 04/17/07...

  • Page 8: Technical Specifications

    Minimum aisle u-turn width with 32 in. (81 cm) scrub head 69 in. (175 cm) Maximum rated climb and descent angle with empty tanks and without optional parking brake Maximum rated climb and descent angle with full tanks and without optional parking brake CUTTER 24V 86039080 01/20/12...
  • Page 9 The weighted root mean square acceleration at the operator’s arms was measured to be below 2.5m/s This was a tri-axial, third-octave-band measurement made during normal operation on a composite tile floor. The measurement and related calculations were made in accordance with ANSI S3.34-1986. CUTTER 24V 86039080 04/17/07...

  • Page 10: How The Machine Works

    HOW THE MACHINE WORKS The Saber Cutter is a battery powered, self- propelled, hard floor scrubber intended for The function of the recovery system is to vacuum commercial use. The appliance applies a the soiled water back into the recovery tank. The...

  • Page 11: Components

    5. Scrub Head Shrouds 6. Solution Tank 7. Solution Tank Cover 8. Solution Tank Drain Hose 9. Solution Strainer 10. Squeegee 11. Aqua-Mizer 12. Top Cover 13. Vacuum Motor 14. Recovery Tank Dome 15. Accessory Pump Port (Optional) CUTTER 24V 86039080 04/17/07...

  • Page 12: Controls

    CONTROLS CUTTER 24V 86039080 04/17/07...
  • Page 13 The brushes will not rotate with the propel control levers in neutral. To increase speed, rotate knob clockwise. To turn scrub brushes off, press the top of the To decrease speed, rotate knob switch. counterclockwise. CUTTER 24V 86039080 04/17/07...
  • Page 14 To decrease squeegee blade deflection along the entire length, turn the two knobs at the To start vacuum motor, press the bottom of the squeegee ends clockwise. switch. To stop vacuum motor, press the top of the switch. CUTTER 24V 86039080 04/17/07...
  • Page 15 The green zone indicates medium or proper operating brush pressure. The red zone indicates heavy or excessive brush pressure. Operating in the red zone may cause the brush circuit breakers to trip. CUTTER 24V 86039080 04/17/07...

  • Page 16: Machine Operation

    WARNING Flammable materials can cause an explosion or 4. Apply brakes, if your machine is equipped with fire. Do not use flammable materials in the tanks. this option. CUTTER 24V 86039080 04/17/07...

  • Page 17: Scrubbing

    TO STOP SCRUBBING 1. Release the propel levers. 2. Turn the scrub brushes off. 3. Raise the scrub brushes. 4. Raise the squeegee. 5. Turn the vacuum off. 6. Turn the machine power off. CUTTER 24V 86039080 04/17/07 3-10...

  • Page 18: Emptying & Cleaning Tanks

    Do not use water hotter than 140°F (60°C) to clean tank. Damage may occur. NOTE: Never allow solution to remain in tank. Damage to tank, seals and valves could occur. 4. Secure drain hose into the retainer. 3-11 CUTTER 24V 86039080 04/17/07...

  • Page 19: Maintenance

    Check parking brake (inspect cables, linkages and pulleys) Check carbon brushes in all vacuum, brush drive, and propel motors Blow out dust in motors Inspect motor commutators Clean chains, cables and pulleys Clean pivot points on squeegee and scrub deck linkages CUTTER 24V 86039080 04/17/07...
  • Page 20 2. Squeegee 3. Aqua Mizer 4. Scrub Brushes 5. Float Shut-Off 6. Solution Strainer 7. Brush Motor 8. Traction Motor 9. Circuit Breakers 10. Brush Shroud & Brush Skirts 11. Vacuum Motor 12. Actuator Scrub Brush CUTTER 24V 86039080 04/17/07...

  • Page 21: Batteries

    5. Ensure that all connections are tight and all Do not overfill. Keep plugs firmly in place at all corrosion removed. times. 6. Every 4 to 6 months, remove that batteries from the machine and clean the battery cases and battery compartment. CUTTER 24V 86039080 04/17/07...

  • Page 22: Checking Battery Specific Gravity

    If the water level is too high before charging, normal expansion rate of the electrolyte may cause an overflow. Resulting in a loss of battery acid balance and damage the machine. CUTTER 24V 86039080 04/17/07...

  • Page 23: Changing Batteries

    7. Raise battery cover and check the battery electrolyte level. It should be up to the indicator ring. If necessary, add distilled water. 8. Lower the battery cover. Note: For additional information about battery charger function, please see the charger Product Manual. CUTTER 24V 86039080 04/17/07...

  • Page 24: Squeegee Blades

    Each blade has four new TOO MUCH edge positions. When installing the front blade, tighten the center thumbscrew first. Insure that SQUEEGEE SIDE VIEW OF the retainer strap is pressed against the blade before tightening the outer screws. CUTTER 24V 86039080 04/17/07...

  • Page 25: To Adjust Squeegee Pitch

    3. Remove each of the Aqua-Mizer squeegee systems. 4. Remove the hardware from each system that retains the blade. PROPER DEFLECTION OF SQUEEGEE BLADE 5. Flip the blades and replace hardware. 6. Re-install each Aqua-Mizer system, brushes or pad drivers and shrouds. CUTTER 24V 86039080 04/17/07...

  • Page 26: Scrub Brushes

    To install, place one hand on the tube, and The scrub brushes should be checked before each then tilt and push the float screen assembly days work for wire, string, wear and damage. over the barb on the tube. CUTTER 24V 86039080 04/17/07...

  • Page 27: Solution Strainer

    4. Remove 4 brush motor mounting bolts located on motor barrel. Reinstall the two attach bolts under scrub deck. from cap into base. 5. Remove brush motor. 9. Maintain alignment between motor barrel base 6. Reverse steps to install. and cap. CUTTER 24V 86039080 04/17/07...

  • Page 28: Brush Motor Replacement

    Remove three bolts on each side that fasten the bracket to the cover and re-assemble in the top holes. When the brushes are replaced with new ones move the covers back to the lower set of holes. 4-10 CUTTER 24V 86039080 04/17/07...

  • Page 29: Vacuum Motors

    Spring inside brush housing will damage motor if brushes are allowed to wear away completely. 8 [9.5mm] Periodically check the length of the carbon brushes. Replace both carbon brushes when either is less than 3/8" (9.5mm) long. CUTTER 24V 86039080 04/17/07 4-11...

  • Page 30: 12. Actuator Scrub Deck

    5. At the bottomed out position, turn the barrel out 1 1/2 turns, then enough more to allow connection to lift linkage. 6. Connect actuator to lift linkage. 7. Check travel of actuator during operation. CUTTER 24V 86039080 04/17/07 4-12...
  • Page 31 MAINTENANCE RECOMMENDED GREASING: 1-2 strokes of Mobiltemp®78 or compatible clay-based or calcium-based grease. CUTTER 24V 86039080 04/17/07 4-13...

  • Page 32: Machine Troubleshooting

    Brush motors do not run, or runs Circuit breaker(s) tripped Reset circuit breaker(s) slowly Loose connection Check motor wires and connection Faulty brush motor contactor Replace contactor Worn brush motor brushes Replace brushes, check commutator CUTTER 24V 86039080 04/17/07 4-14...
  • Page 33 Faulty key switch Replace switch Little or no propel Low battery charge Charge batteries Wheels spin Decrease brush pressure Controller overheated Allow cool down period Adjust brush shroud if needed Loose connection Check motor wires and connection CUTTER 24V 86039080 04/17/07 4-15...

  • Page 34: Control Handle

    CONTROL HANDLE CUTTER 24V 86039080 04/17/07...
  • Page 35 70783 SCR, 8-32 X 7/8 PHTC TYPE 23 86277050 70782 SCR, 5/16-18 X 3/4 SHCS NP 86238740 38308 HANDLE, RIGHT 86004120 38312 PROPEL HANDLE ASM, LEFT SERVICE ONLY 86004130 38313 PROPEL HANDLE ASM, RIGHT SERVICE ONLY CUTTER 24V 86039080 04/17/07...

  • Page 36: Cover (Front) & Tank Mount

    COVER (FRONT) & TANK MOUNT CUTTER 24V 86039080 04/17/07...
  • Page 37 KNOB, 5/16 –18 4 PRONG 86276380 70639 SCR, 5/16-18 X 1.25 SSSCU 86278080 70823 SET SCR, 5/16-18 X 1.75 CP SS 86271840 57285 NUT, 5/16-18 HEX NYLOCK THIN SS 86010670 87029 WASHER, 5/16 FLAT SS 86068150 140706 BRACKET, TANK SUPPORT CUTTER 24V 86039080 04/17/07...

  • Page 38: Cover (Top) & Tank Mount

    COVER (TOP) & TANK MOUNT CUTTER 24V 86039080 04/17/07...
  • Page 39 86233390 80887 CLAMP, 7/8 DIA “P” CUSHIONED 86271870 57290 NUT, 1/4-20 HEX NYLOCK THIN SS 86276490 70670 SCR, 5/16-18 X 5/8 HHCS SS 86292630 NET, CARGO NOT SHOWN 86276780 70728 SCR, 5/16-18 X 3/4 HHCS SS CUTTER 24V 86039080 09/30/11...

  • Page 40: Decal

    DECAL CUTTER 24V 86039080 04/17/07...
  • Page 41 86243520 500564 LABEL, ELEC. PANEL 24V DELUXE 86243530 500565 LABEL, ELEC. PANEL. LOWER 24V 86243600 500578 LABEL, SQUEEGEE LEVER 86243550 500572 LABEL, CUTTER LEFT 86243180 500479 LABEL, SOLUTION FILL 24V 86004970 50990 LABEL, WINDSOR LOGO DOMED CUTTER 24V 86039080 04/17/07...

  • Page 42: Electrical Panel

    ELECTRICAL PANEL DETAIL 'A' 12AB DETAIL 'A' CUTTER 24V 86039080 04/17/07...
  • Page 43 METER, 12-48 VDC LED HOUR 1000099610 NOT SHOWN 86267340 880269 WIRE, 22” RED/18 76040 X 76075 1000099610 NOT SHOWN 86267360 880271 WIRE, 14” BLK/18 76011 X 76040 86238030 36235 GASKET, SWITCH CARLING 86007210 72165 SWITCH, DPDT 3-POSITION ROCKER CUTTER 24V 86039080 10/12/07 5-10...

  • Page 44: Lift Handle

    LIFT HANDLE CUTTER 24V 86039080 04/17/07 5-11...
  • Page 45 WASHER, THRUST .51ID X 1OD BRO 86082390 62961 PLATE, LEVER NOTCH 24V DLX 86276780 70728 SCR, 5/16-18 X 3/4 HHCS SS 86228840 09124 BEARING, FLANGED .314 ID X .502 OD 86006930 70514 SCR, 5/16-18 X 1.00 BSHCS SS CUTTER 24V 86039080 04/17/07 5-12...

  • Page 46: Lift Handle Linkage

    LIFT HANDLE LINKAGE CUTTER 24V 86039080 04/17/07 5-13...
  • Page 47 CABLE, .125 X 26.5 0707 SS LB E-E 86009560 82053 PIN, CLEVIS 1/4” X 5/8” PLTD 86228900 09138 BEARING, FLANGED .252ID X .503OD 86259400 87205 WASHER, THRUST .51ID X 1OD BRO 86278910 87003 WASHER, 3/8 ID X 7/8 OD SS CUTTER 24V 86039080 04/17/07 5-14...

  • Page 48: Recovery Tank

    RECOVERY TANK CUTTER 24V 86039080 04/17/07 5-15...
  • Page 49 27941 COVER, VACUUM HOSE 86069780 140511 BRACKET, VAC INTAKE 86010630 87013 WASHER, 1/4ID X 5/8OD SS 86273810 70018 SCR, 1/4-20 X 1 HHCS SS 86236410 34394 FLOAT, VAC SHUT OFF 86257860 78390 TUBE, 1.5 WASTE CUTTER 24V 86039080 04/17/07 5-16...

  • Page 50: Scrub Brush/Pad Driver

    SCRUB BRUSH/PAD DRIVER 5-17 CUTTER 24V 86039080 04/17/07...
  • Page 51 SCR, 8-32 X 3/4 PTHMS 86276600 70696 SCR, 10-32 X 3/4 PTHMS 86007910 73817 SPRING, EXT .31 D X 2.0 L X .03 W SS 86007280 730011 SOCKET, DRIVE BRUSH 86005940 62852 PLATE, BRUSH RELEASE 5-18 CUTTER 24V 86039080 04/17/07...

  • Page 52: Scrub Deck Aqua-Mizer-26In Scrubhead

    SCRUB DECK AQUA-MIZER-26IN SCRUBHEAD CUTTER 24V 86039080 04/17/07 5-19...
  • Page 53 BLADE, 13IN RT URETHANE 86271840 57285 NUT, 5/16-18 HEX NYLOCK THIN SS 86082380 62958 PLATE, AQ LOCK R 13 IN 86024970 47397 AQUA-MIZER 26” SCRUBHEAD LEFT SERVICE ASM 86024980 47400 AQUA-MIZER 26” SCRUBHEAD RIGHT SERVICE ASM CUTTER 24V 86039080 04/17/07 5-20...

  • Page 54: Scrub Deck Aqua-Mizer-32In Scrubhead

    SCRUB DECK AQUA-MIZER-32IN SCRUBHEAD CUTTER 24V 86039080 04/17/07 5-21...
  • Page 55 BLADE, AQ RT 16 INCH URETHANE 86271840 57285 NUT, 5/16-18 HEX NYLOCK THIN SS 86249600 66375 PLATE, AQ LOCK RIGHT 16 IN 86024960 47396 AQUA-MIZER 32” SCRUBHEAD LEFT SERVICE ASM 86004700 47401 AQUA-MIZER 32” SCRUBHEAD RIGHT SERVICE ASM CUTTER 24V 86039080 04/17/07 5-22...

  • Page 56: Scrub Deck Motors

    SCRUB DECK MOTORS CUTTER 24V 86039080 04/17/07 5-23...
  • Page 57 WASHER, 5/16 SPLIT LOCK PLTD WASHER, .344ID X 1.13OD X .09T 86279630 87212 PLTD 86003420 29220 DRIVER, BRUSH SD SUPPLIED W/ 86004810 48040 KEY, 1/4 SQ. X 1.00 WASHER, .78ID X 1.63OD X .25T 86279640 87213 PLTD CUTTER 24V 86039080 04/17/07 5-24...

  • Page 58: Scrub Deck Skirt

    SCRUB DECK SKIRT CUTTER 24V 86039080 04/17/07 5-25...

  • Page 59: Scrub Deck Skirt-26In Scrubhead

    SKIRT, 26INCH LEFT 86066390 140544 BAND, SHROUD SKIRT RIGHT 86007450 730120 SKIRT, 26INCH RIGHT 86004730 47414 SHROUD ASM, 26” RIGHT SCRUBHEAD SERVICE ONLY 86004740 47415 SHROUD ASM, 26” LEFT SCRUBHEAD SERVICE ONLY 86244100 500831 LABEL, AQUA-MIZER CUTTER 24V 86039080 04/17/07 5-26...

  • Page 60: Scrub Deck Skirt-32In Scrubhead

    SCRUB DECK SKIRT – 32IN SCRUBHEAD CUTTER 24V 86039080 04/17/07 5-27...
  • Page 61 86066400 140548 BAND, SKIRT RIGHT 32 INCH 86007540 730146 SKIRT, 32 INCH RIGHT 86004710 47412 SHROUD ASM, 32” RIGHT SCRUBHEAD SERVICE ONLY 86004720 47413 SHROUD ASM, 32” LEFT SCRUBHEAD SERVICE ONLY 86244100 500831 LABEL, AQUA-MIZER CUTTER 24V 86039080 04/17/07 5-28...

  • Page 62: Scrub Deck Lift Linkage-26In Scrubdeck

    SCRUB DECK LIFT LINKAGE-26IN SCRUBDECK CUTTER 24V 86039080 04/17/07 5-29...
  • Page 63 BEARING, .252ID X .503OD X 1.0 86228900 09138 BEARING FLANGED , .252ID X .503OD 86273820 70019 SCR, 1/4-20 X 1.25 HHCS 86066770 140492 BAR LINK LEFT 86066720 140447 BAR LINK, RIGHT 86236650 34388 FRAME, W24V SCRUB DECK CUTTER 24V 86039080 04/17/07 5-30...

  • Page 64: Scrub Deck Lift Linkage-32In Scrubdeck

    SCRUB DECK LIFT LINKAGE-32IN SCRUBDECK CUTTER 24V 86039080 04/17/07 5-31...
  • Page 65 WASHER, THRUST .51ID X 1OD BRO 86228920 09140 BEARING, .252ID X .503OD X 1.0 86228900 09138 BEARING FLANGED .252ID X .503OD 86273820 70019 SCR, 1/4-20 X 1.25 HHCS 86066810 140513 BAR, LINKAGE, LEFT 86066870 140566 BAR LINK, RIGHT CUTTER 24V 86039080 04/17/07 5-32...

  • Page 66: Scrub Deck Lift

    SCRUB DECK LIFT CUTTER 24V 86039080 04/17/07 5-33...
  • Page 67 BRACKET, CENTER LINK 86007020 70673 SCR, 5/16-18 X 1.25 HHCS SS 86197150 70669 SCR, 5/16 X 1.25 ELEV FLDG SA 86273740 70010 SCR, 1/4-20 X 1.5 HHCS SS 86228840 09124 BEARING, FLANGED .314ID X .502OD CUTTER 24V 86039080 04/17/07 5-34...
  • Page 68 SCRUB DECK LIFT CUTTER 24V 86039080 04/17/07 5-35...
  • Page 69 5/16-18 HEX NYLOCK THIN SS 86006560 70083 SCR, 5/16-18 X 1 HHCS SS 86010670 87029 WASHER, 5/16 FLAT SS 1000141108 86279650 87222 WASHER, SEAL 5/16 X 3/4 OD SS 1000141108 86032890 70264 SCR, 5/16-18 X 1.50 HHCS SS CUTTER 24V 86039080 04/17/07 5-36...

  • Page 70: Solution

    SOLUTION HOSE FROM FILTER ASM. CUTTER 24V 86039080 04/17/07 5-37...
  • Page 71 NUT, 5/16-18 HEX NYLOCK THIN SS 86276380 70639 SCR, 5/16-18 X 1.25 SSSCU 86233150 20042 CLAMP, 3/8 HOSE (D-SLOT) 86197910 40022 HOSEBARB, 1/2 MPT X 1/2 POLY DL 86010670 87029 WASHER, 5/19 FLAT SS 1000141108 86032890 75460 TANK, SOLUTION 24V CUTTER 24V 86039080 04/17/07 5-38...
  • Page 72 SOLUTION CUTTER 24V 86039080 04/17/07 5-39...
  • Page 73 SOLENOID SPRING KIT ONLY 86281100 39274 HOSE, 1/2 WIRE BOUND X 8” 86003580 34327 FITTING, 1/2” X 3/8” RED T 86280820 39035 HOSE, 3/8 NYLOBRIAD X 10” 86001550 40043 HOSEBARB, 3/8 MPT X 3/8 90 D 5-40 CUTTER 24V 86039080 10/08/08...

  • Page 74: Squeegee-26In Scrubhead

    SQUEEGEE-26IN SCRUBHEAD CUTTER 24V 86039080 01/20/12 5-41...
  • Page 75 SCR, 5/16-18 X 2.00 HHCS SS 86006270 66276 PIN, CLEVIS 5/16 X 1.63 86069870 140531 BRACKET, SQUEEGEE WHEEL 86026530 47398 SQUEEGEE 26 IN SCRUBHEAD SERVICE ASM 1000099023 86004890 48095 KNOB, ALUM 3/8-16 NYLOCK NUT SS CUTTER 24V 86039080 04/17/07 5-42...

  • Page 76: Squeegee-32In Scrubhead

    SQUEEGEE-32IN SCRUBHEAD CUTTER 24V 86039080 01/20/12 5-43...
  • Page 77 70775 SCR, 5/16-18 X 2.00 HHCS SS 86006270 66276 PIN, CLEVIS 5/16 X 1.63 86069870 140531 BRACKET, SQUEEGEE WHEEL 86026540 47399 SQUEEGEE 32” SCRUBHEAD SERVICE ASM 86004890 86004890 48095 KNOB, ALUM 3/8-16 NYLOCK NUT SS CUTTER 24V 86039080 04/17/07 5-44...

  • Page 78: Squeegee Lift Linkage (Lower)

    SQUEEGEE LIFT LINKAGE (LOWER) CUTTER 24V 86039080 04/17/07 5-45...
  • Page 79 SCR, 5-16-18 X 1.00 CARRIAGE SS 86249060 82061 PIN, CLEVIS 3/8 X 4.63 PLTD 86008870 80815 BEARING, FLANGED 3/8” ID X 11/16” 86259400 87205 WASHER, THRUST .51ID X 1OD BRO 86029480 80808 PIN, CLEVIS 3/8” X 5.5”L PLTD CUTTER 24V 86039080 04/17/07 5-46...

  • Page 80: Vacuum

    VACUUM CUTTER 24V 86039080 04/17/07 5-47...
  • Page 81 12 86233430 81431 1 CLAMP, 2.50 WORM GEAR OPEN 1000122451 14 86064910 54194 1 MUFFLER, VAC MOTOR See Cover & Tank 15 86070630 140704 1 BRACKET, VAC MOTOR 1000122451 Mount Page For Tank Support Brkt CUTTER 24V 86039080 04/17/07 5-48...

  • Page 82: Wheels & Frame

    WHEELS AND FRAME CUTTER 24V 86039080 06/29/11 5-49...
  • Page 83 SCR, 5/16-18 X 1 HHCS SS NP 86092580 62921 FRAME, MAIN 24V 86002310 18041 CASTER, 4 DIA X 2 W X 3.56R 86270880 57032 NUT, 3/8-16 SERRATED FLG 86278910 WASHER, 3/8 ID X 7/8 OD SS CUTTER 24V 86039080 01/18/12 5-50...

  • Page 84: Wiring-Battery

    WIRING- BATTERY CUTTER 24V 86039080 04/17/07 5-51...
  • Page 85 86260520 880384 WIRE, 4X67 BK C. TERM 5/16 RING 86233360 28038 CLAMP, CABLE KIT SY945 86270890 57034 NUT, ACORN 10-32 86010650 87018 WASHER, #10 X 9/16 OD 86273980 70066 SCR, 10-32 X 3/4 PPHMS SS CUTTER 24V 86039080 04/17/07 5-52...

  • Page 86: Wiring-Control Panel

    METER BATTERY CABLE 11 RED 10 RED 14 RED 13 RED 15 RED NEGATIVE BATTERY 56 RED 51 RED 1/35 52 RED CABLE MAIN PROPEL BRUSH BRUSH RIGHT LEFT SWITCH 16 RED INDICATES OPTIONAL ACCESSORY. CUTTER 24V 86039080 02/20/09 5-53...
  • Page 87 DIODE ASM, 76008 X 76008 86003410 29215 DIODE ASM, 76075 X 76075 86267340 880269 WIRE, 22” RED/18 76040 X 76075 86269300 88868 WIRE, 16” RED/18 STRIP X STRIP 86267360 880271 WIRE, 14” BLK/18 76011 X 76040 CUTTER 24V 86039080 02/20/09 5-54...

  • Page 88: Wiring-Main Harness

    ACTUATOR 75 BLK 78 RED 79 BLK 76 RED 69 RED 77 BLK 74 RED 68 GRN/YLW SOLENOID VALVE DIAGRAM B 5 BRN 68 GRN/YLW 69 RED 6 BLK PROPEL MOTOR 78 RED 79 BLK CUTTER 24V 86039080 04/17/07 5-55...
  • Page 89 WIRING-MAIN HARNESS SERIAL NO. PART NO. PRV NO. DESCRIPTION FROM NOTES: 86238980 41441 HARNESS, MAIN CUTTER 24V 86039080 04/17/07 5-56...

  • Page 90: Wiring-Schematic-Scx264, Scx324

    WIRING-SCHEMATIC –SCX264, SCX324 INDICATES OPTIONAL ACCESSORY CUTTER 24V 86039080 04/17/07 5-57...

  • Page 91: Wiring-Schematic-Scxc264, Scxc324

    WIRING – SCHEMATIC-SCXC264, SCXC324 INDICATES OPTIONAL ACCESSORY CUTTER 24V 86039080 04/17/07 5-58...

  • Page 92: Brake-Option

    BRAKE-OPTION 11 12 CUTTER 24V 86039080 04/17/07 5-59...
  • Page 93 86070150 140574 BRKT, TANK MOUNT 24V 86259400 87205 WASHER, THRUST .51 ID X 1 OD BRO 86228900 09138 BEARING, FLANGED .252ID X .503OD 86273820 70019 SCR, 1/4-20 X 1.25 HHCS SS 86077280 51378 LEVER, BRAKE CUTTER 24V 86039080 04/17/07 5-60...

  • Page 94: Emergency Stop-Option

    EMERGENCY STOP-OPTION CUTTER 24V 86039080 04/17/07 5-61...
  • Page 95 EMERGENCY STOP-OPTION SERIAL NO. PART NO. PRV NO. DESCRIPTION FROM NOTES: 86007180 72160 SWITCH, EMERGENCY STOP 86269300 88868 WIRE, 16” RED/18 STRIP X STRIP NOT SHOWN CUTTER 24V 86039080 04/17/07 5-62...

  • Page 96: Accessory Pump-Option

    ACCESSORY PUMP-OPTION SOLUTION RECOVERY BRACKET TO COUPLING TO FILTER (EXISTING HOSE) CUTTER 24V 86039080 04/17/07 5-63...
  • Page 97 56012 NIPPLE, 1/4 FPT QD 86282110 39571 HOSE, 1/2” WIREBOUND X 5.5 86280750 151-38A HOSE, 1/2 WIREBOUND X 21” 86239020 41463 HARNESS PUMP KIT ADAPTER NOT SHOWN 86264940 27051 CABLE TIE, 11.38” UL/CSA NOT SHOWN CUTTER 24V 86039080 04/17/07 5-64...
  • Page 98 BATTERY CHARGER-SCC326 CUTTER 24V 86039080 04/17/07 5-65...
  • Page 99 830962 RELAY, 15A 24V MINI 86133400 99817 0.125 TAPE, 1/32T X 1.0 25A 86234390 23725 CORD ASM, 16/3 SJTW X 2M IEC 86268060 880460 WIRE, 2” GRN/16 76033 X 76044 86075390 270147 COVER, CHARGER DELTA-Q 5-66 CUTTER 24V 86039080 04/17/07...

  • Page 100: Suggested Spare Parts

    140506 BLADE, 13 IN RIGHT 86007430 730114 SQUEEGEE, REAR BLADE LINTEX 86008020 73894 SQGE BLADE, FRONT LINATEX 35" 86007440 730119 SKIRT 26 INCH LEFT 86007450 730120 SKIRT 26 INCH RIGHT 86004860 48073 KEY, SWITCH NOTES: 5-67 CUTTER 24V 86039080 04/17/07...
  • Page 101 CUTTER 24V 86039080 04/17/07 5-68...
  • Page 102 5-69 CUTTER 24V 86039080 04/17/07...

This manual is also suitable for:

Scxc264Bscscx264Scx324Scxc324

Table of Contents