Cool Box; Homelink - Honda ODYSSEY TOURING 2012 Technology Reference Manual

COOL BOX

Store beverages in a conveniently located box to keep them cool.
How It Works
• Store up to four 20-ounce bottles or six 12-ounce cans. Keep already
cold drinks from becoming warm.
• Press the COOL BOX button to turn it on or off. A green indicator
light appears when the Cool Box is on. Cold air from the air
conditioning system flows into and circulates within the box.
Usage Tips
• The Cool Box is not a refrigerator or cooler. It does not cool down warm
drinks.
• Do not use ice.
• Do not store perishable items inside for an extended amount of time.
• Keep the box closed for best results.
• The box cannot be removed for cleaning.
• Because the air conditioning system is always on when the Cool Box is in use,
fuel economy may be slightly reduced.
• If the ignition switch is turned to LOCK (0), the box maintains its temperature
for one hour.
12

HOMELINK

The HomeLink Universal Transceiver can be programmed to operate up to three
remote-controlled devices around your home, such as garage doors, lighting, or home
security systems.
Training a Button
1
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.
2
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
NO YES
a
Press and hold the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
NO YES
If you have any problems programming HomeLink, see the owner's manual included
with the device you are trying to program, call HomeLink at (800) 355-3515, or
visit www.homelink.com.
®
Press and hold the programmed
3
HomeLink button for about a
second.
Does the device (garage door opener) work?
NO YES
4
Training
Press and hold
complete
the HomeLink
button again.
HomeLink indicator HomeLink LED
flashes for 2 seconds,
remains on.
then remains on.
a
The remote has a rolling code.
Press the "learn" button on the
remote-controlled device (e.g.,
garage door opener).
b
Within 30 seconds, press and
hold the programmed HomeLink
button for 2 seconds.
5
Press the programmed HomeLink
button again; the remote-controlled
device should operate.
13