Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Triplex Manuals
  4. Touch terminals
  5. POSIFLEX KS7215
  6. Installation manual

Triplex POSIFLEX KS7215 Installation Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
POSIFLEX USER INSTALLATION GUIDE
Copyright© 2013 Triple E Technologies. All rights reserved.

Advertisement

loading
Need help?

Need help?

Do you have a question about the POSIFLEX KS7215 and is the answer not in the manual?

Questions and answers

Summary of Contents for Triplex POSIFLEX KS7215

  • Page 1 POSIFLEX USER INSTALLATION GUIDE Copyright© 2013 Triple E Technologies. All rights reserved.

  • Page 2: Install Guide

    POSIFLEX USER INSTALLATION GUIDE Manufacturer Supplied Components: 1. POSIFlex KS7215 touchhead 2. Triple E Technologies Posiflex Installation Card 3. Keyboard 4. Mouse 5. Power Cord 6. Display Port to DVI Adapter 7. Resource media DVD 8. FCC Required Safety and Regulatory Documentation 9.

  • Page 3: Connecting Cash Drawer

    8. Brightness Control Button “+” 9. Brightness Control Button “-“ 10. USB Ports 11. Base Stand 12. Compression lock for base stand cover 13. Cable exit 14. Cable groove 15. Cable exit 16. Cable holder 17. Bottom Plate 18. Cable Passage in bottom plate 19.

  • Page 4: Installation Instructions

    INAL SSEMBLY AND NSTALLATION NSTRUCTIONS 2. Remove the two screws that attach the panel to the touchscreen. 1. If you wish to install an optional card reader, locate the accessory panel on the right hand side of the touchscreen. 3. Remove the panel. The connector for the card reader will be visible.
  • Page 5 5. Insert the connector from the touchscreen 7. Locate the cable cover at the rear of the into the port on the card reader. touchscreen base. 6. Attach the card reader to the touchscreen with the same two screws previously 8.
  • Page 6 9. The metal stand and back-up battery cable 12. Locate the two locking tabs for the port should now be visible. cover. Gently press down on these tabs and slide the cover away from the touchscreen. 13. You should now be looking at the accessory ports at the bottom of the touchscreen.
  • Page 7 15. In this example, an optional customer 18. Lift the touchscreen up and away from the display will be connected to ‘COM1’. The base. device is then mounted on the rear of the touchscreen with two screws. 19. Note the touchscreen is connected to the 16.
  • Page 8 21. Place the customer display cable in the 23. Make sure the customer display cable is notch, and route the cable through to the properly routed through the notch and all cable organizer at the bottom of the base four pins are properly seated in their unit.
  • Page 9 26. Connect the hand scanner to ‘COM2’. 30. Connect the cash drawer cable to the ‘CR’ port. 27. Insert the power supply plug into the hand scanner plug. 31. Connect the touchscreen’s power supply cable to the ‘DC IN’ port 28.
  • Page 10 33. Tuck all cables into the cable organizer (if so 35. At the rear of the touchscreen, gather all of desired). the cables into the lower-left-hand corner of the base (except the customer display cable). 34. Slide the cable cover back into place. Swivel the touchscreen back into an upright position.
  • Page 11 37. Locate the button cover panel on the left- 39. Contact Triple E Technologies to complete hand side of the touchscreen. Press in the the set-up and install of your POSIFLEX center of the panel to open. device. 38. Locate the power button and press it. This will power on the touchscreen.