Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CPcam IR-CAM-C
Summary of Contents for CPcam IR-CAM-C
- Page 1 User’s Manual IR-CAM-C Please read this instruction thoroughly before operation and retain it for future reference. PIR V1.2 User’s Manual IR-CAM-C Please read this instruction thoroughly before operation and retain it for future reference. PIR V1.2...
- Page 2 Thank-You Note Before You Get Start First of all, we would like to express our gratitude to you for purchasing CPcam products. Once again, this product is designed uniquely to meet all your personal needs with our great industry-designing ability and our everlasting perseverance to the quality of all our products.
- Page 3 WARNING WARNING The apparatus shall not be exposed to dripping. No objects filled with liquids, such as vases, shall be placed around the apparatus. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage"...
-
Page 4: Package Content
PACKAGE CONTENT PACKAGE CONTENT User’s Manual IR-CAM-C User’s Manual Camera Screws / Power/Video/Audio Cable Plastic Bracket PACKAGE CONTENT PACKAGE CONTENT User’s Manual IR-CAM-C User’s Manual Camera Power/Video/Audio Screws / Cable Plastic Bracket... - Page 5 CONNECTION CONNECTION CONNECTION BASIC CONNECTION 1.Connect the power terminal of the camera to a 12V DC regulated power supply. 2.Connect the camera video output and the monitor video input with 75 coaxial cable. 3.Connect the camera audio output and the monitor audio input with a coaxial cable. PIR Camera CONNECTION CONNECTION...
- Page 6 FEATURES FEATURES IR-CAM-C CPC151 CPC251 1/3“ B/W CCD sensor 1/4“ Sony Color CCD sensor Min.Illumination: 0.25Lux / F2.0 Min.Illumination: 1Lux / F2.0 Lens angle:67.5° Lens angle:90° PIR detection zone for 100° with 10meters (25 °C) AC125V / 10A (max) lamp control loading 4 type PIR active time, 10, 30, 120 sec.
-
Page 7: Specification
SPECIFICATION SPECIFICATION Model CPC151 CPC251 IR-CAM-C 1/4” Sony Color CCD sensor Pick-up Element 1/3“ B/W CCD sensor 1/4” Sony Color CCD sensor (W / Sony DSP) Resolution Standard Min. Illumination 0.25Lux / F2.0 1Lux / F2.0 510(H) x 492(V) <EIA> / Number of Pixel 510(H) x 492(V) <NTSC>... -
Page 8: Layout Description
LAYOUT DESCRIPTION LAYOUT DESCRIPTION Jumper PIR sensor CCD camera Relay Relay Lamp terminal Alarm Terminal (NC, COM, NO) Video Output Audio Output Lamp DC 12V Input AC 120V AC 230V LAYOUT DESCRIPTION LAYOUT DESCRIPTION Jumper PIR sensor CCD camera Relay Relay Lamp terminal Alarm Terminal... - Page 9 PIR DETECTION PATTERN PIR DETECTION PATTERN 67.5° 2.0M SIDE VIEW TOP VIEW PIR DETECTION PATTERN PIR DETECTION PATTERN 67.5° 2.0M SIDE VIEW TOP VIEW...
-
Page 10: Installation And Wiring
INSTALLATION & WIRING INSTALLATION & WIRING A. Open the front cover. B. Lead the cable through the access hole. C. Connect the cable to the terminals. D. Clap the cover. MONITOR / TV LAMP CONTROL PANEL SIREN INSTALLATION & WIRING INSTALLATION &... -
Page 11: Installation Hints
INSTALLATION HINTS INSTALLATION HINTS PIR Camera can easily be installed with its swivel bracket. Please refer to the following DO & DON’T before installation. •Recommended to install in the way that motion “across” the detection zones than “toward” the unit. •Recommended to mount on a stable surface which is not subject to vibration. -
Page 12: Walking Test
WALKING TEST WALKING TEST After PIR Camera is properly installed, the walking test can be proceeded according to the following: A. Apply the power and wait for 30 sec. for PIR Camera to warm up…Check video output. B. Walk across the detection Zones at normal speed. The video and alarm control signal will be triggered when PIR detects a movement. -
Page 13: Jumper Configuration
JUMPER CONFIGURATION JUMPER CONFIGURATION A. To select the active time of the PIR camera, please install a jumper at the proper position. (Default is 10 seconds.) The video of the camera and the alarm control time will be activated for 10 seconds. Please see the following configuration: 120 sec Always On... - Page 14 B. If you need the video to be activated in “ALWAYS ON ” mode, please place the other jumper at “ALWAYS ON” position. The default of the alarm control time will still be 10 seconds. For example, if you need the video to be always on and the alarm control time to be 30 seconds, you need to place one of the jumper’s at “ALWAYS ON”...
- Page 15 LAMP CONTROL & ALARM OUTPUT LAMP CONTROL & ALARM OUTPUT Lamp Control: The Lamp terminal, N.O. Relay output is capable of switch the lamp up to 5A/250VAC. Alarm Output: Three terminals, N.C. COM, N.O. are provided to give users full choice of wiring configuration. VCR, monitor, and siren can be connected upon different application, rating for this output is 30V max.
Need help?
Do you have a question about the IR-CAM-C and is the answer not in the manual?
Questions and answers