Setup > Help - Linksys WRE54G User Manual

Chapter 3
Setup > Password
Password
This password protects access to the Web-
based Utility. Enter the new password in the Password
field. Then enter it again in the next field to confirm it.
Restore Factory Defaults
Expander's factory default settings, click Yes. Then, click
Save Settings. Otherwise, keep the default, No.
IMPORTANT: Restoring the Range Expander's
factory default settings will erase all of your
Wireless and WEP settings, and replace them
with the factory defaults. Do not reset the
Range Expander if you want to retain these
settings
Backup/Restore Setting
To back up the configuration
file of the Range Expander, click Backup. The File Download
screen will appear. Click Save and follow the on-screen
instructions to back up the file on your PC.
File Download
To restore the back-up configuration file, click Restore
and follow the on-screen instructions.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes. If you require additional
information, click Help.
Wireless-G Range Expander
To restore the Range
Advanced Configuration
Setup > Help
Setup > Help
The Help screen offers a variety of resources. If you want
help information about the Setup and Password tabs in
this Web-based Utility, click the Help tab. You can also
access the Linksys website, online User Guide for the
Range Expander, or the Adobe website (to download the
free Adobe Reader program). You can also upgrade the
Range Expander's firmware using this screen.
The links to the help information for the Setup and
Password tabs are listed on the left-hand side of the screen.
Linksys Website Click the Linksys Website link to connect
to the Linksys homepage for extensive help and product
information. (This is available only if you have an active
Internet connection.)
Online User Guide in PDF Format
guide in PDF format, click this link. If you do not have
the Adobe Reader installed on your computer, click
the Adobe Website link or go to the Setup Wizard CD-
ROM to download this software. (To access the Adobe
website, you will need an active Internet connection.) To
download from the CD-ROM, click Start and select Run.
Type D:\Acrobat (if "D" is the letter of your CD-ROM drive).
Adobe Website Click the Adobe Website link or go to
the Setup Wizard CD-ROM to download this software. (To
access the Adobe website, you will need an active Internet
connection.)
Firmware Upgrade The
date of the Range Expander's current firmware are
displayed here. New firmware versions are posted at
www.linksysbycisco.com/international
be downloaded for free. If the Range Expander is not
experiencing difficulties, then there is no need to
download a more recent firmware version, unless that
version has a new feature that you want to use. Loading
new firmware does not always enhance the speed or
quality of your Internet connection.
To upgrade the Range Expander's firmware:
1. Go to the
www.linksysbycisco.com/international
proceed to the product page for the Range Expander.
For an online user
version number and
and can
Linksys website,
and
7