AC wall outlet. Receiving Inspection After removing your MINUTEMAN PDU from its carton, it should be inspected for damage that may have occurred in shipping. Immediately notify the carrier and place of purchase if any damage is found. Warranty claims for damage caused by the carrier will not be honored.
Platinum Protection Document (if applicable) 3.2. Selecting Installation Position The Minuteman PDU Series is intended to be install in a temperature controlled environment that is free of conductive contaminants. Avoid locations near heating devices, water or excessive humidity, or where the PDU is exposed to direct sunlight.
3.4. Connecting the Equipment Appendix Plug the equipment into the output receptacles on the PDU. Do not use extension A.1. Specifications cords, adapter plugs or surge strips on the output of the PDU. Ensure that the load does not exceed the maximum output rating of the PDU (refer to the information label Model Number MMPD2020V60DCL on the PDU or the Electrical Specifications in this manual).
2000 Joules 3.Call your dealer for assistance. If you cannot reach your dealer, or if they cannot OUTPUT PARAMETERS resolve the problem call or fax MINUTEMAN Technical Support at the following Nominal Voltage 120VAC numbers; Voice phone (972) 446-7363, FAX line (972) 446-9011 or contact...
Manufacturer’s Name: original product. This warranty applies only to the original purchaser who must have Para Systems, Inc. (MINUTEMAN UPS) properly registered the product within 10 days of purchase. The warranty shall be void if (a) the equipment is damaged by the customer, is Manufacturer’s Address:...
Need help?
Do you have a question about the MMS620V16PC6 and is the answer not in the manual?
Questions and answers