INSTANT HEAT TECHNOLOGY
The iron’s unique high temperature settings and
Instant Heat technology provide styling versatil-
ity for all hair types. If you have fine hair, a low
temperature will provide the best results. If you
have thick, wavy or hard-to-straighten hair,
keep the heat setting on high. You can vary the
iron’s temperature according to your particular
need by scrolling the
temperature settings using the +/– buttons.
For best results, use a light styling product
before blow-drying hair. Start with a hair
section that is 1 ½" wide and no more than
½" thick. Open the iron and place a hair
section between the two hot plates, close
to the scalp. Trap hair between the plates by
firmly squeezing the handles together. While
maintaining the tension, slowly pull the unit
down along the hair section toward the end
of hair. At the end of hair section, release
the pressure on the handle and allow the
hair section to slide out. Repeat process on
additional sections of hair until you achieve
the hair style you desire. It may be necessary
to repeat process on certain areas, depending
on the texture of your hair.
As you straighten your hair, you’ll find that
it glides more easily over the micro-bonded
plate surfaces, and any residue from styling
products is easy to remove.
Some experience is necessary when learning
to use this straightening iron. After using the
iron several times, you will learn the ideal
way to straighten and style your hair.