1. Manuals
  2. Brands
  3. Dynalink Manuals
  4. PCI Card
  5. DY56ASP
  6. Quick setup manual

Dynalink DY56ASP Quick Setup Manual

56k internal modem
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
56K Internal Modem
Quick Setup Guide
DY56ASP

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DY56ASP and is the answer not in the manual?

Questions and answers

Summary of Contents for Dynalink DY56ASP

  • Page 1 56K Internal Modem Quick Setup Guide DY56ASP...
  • Page 2 MODEM DRIVERS button if you are reading this Quick Set-Up Guide from the supplied Dynalink CD. Otherwise, load the supplied Dynalink CD, go to product page and click the MODEM DRIVERS button. To view or print the User’s Manual for this modem, return to the previous menu and click the VIEW USER MANUAL button.
  • Page 3 2. To install a driver, return to the previous menu and click the MODEM DRIVERS button if you are reading this Quick Set-Up Guide from the supplied Dynalink CD. Otherwise, load the supplied Dynalink CD, go to product page and click the MODEM DRIVERS button.
  • Page 4 56K Internal Modem Quick Set-up Guide Windows 2000: Select Search for a suitable driver for my device-Next then Specify a location- Next. Browse to D:\Driver\W2K (substitute D: with y our CD drive letter), then OK–Next. If Digital Signature Not Found appears click Yes to continue and Finish to complete driver installation.
  • Page 5 Internet and setting up an e-mail account. Once you are connected to the Internet, you will find further information on Dynalink Modem’s World Wide Web site at www.dynalink.com.au/support (Australia) or www.dynalink.co.nz/support (NZ). Here you can find how to set up software, extensive troubleshooting information, downloads and other information.

  • Page 6: Troubleshooting

    56K Internal Modem Quick Set-up Guide Troubleshooting NO DIALTONE is reported Check the modem country selection is set to Australia as outlined in Step 3. Click Start–Settings-Control Panel Modems–Properties–Connection –Advanced. Under Extra Settings , enter X3. Check you are using the phone cable that came with the modem - not a phone cable normally used with a phone.
  • Page 7 Return delivery after repair will be paid for by Dynalink. We reserve the right not to repair or replace goods that: have been mishandled, abused or not installed according to the guidelines as outlined in the instructions.

Table of Contents