Network Confi Guration - Blaupunkt 50/149Z-GB-5B2-FGKU User Manual

NETWORK CONFIGURATION
For the network confi guration to work the TV will need to be connected to your home network via an
Ethernet cable, with these requirements in place the TV will connect to the network automatically.
If you are looking to change the confi guration to a static IP address this can be done by following the
instructions below.
1
1) In the Setup Menu you will need to highlight and select Network Confi guration.
2) When the Network menu appears highlight and select Wired Network.
3) Next the Wired Network menu will appear please highlight and select Confi guration.
4
4) The Network Confi guration menu allows you to choose between DHCP and Static.
DHCP - will automatically connect the TV to your home network (this is the default setting and is highly
recommended)
Static - is an advanced option and allows you to manually change the IP, Netmask, Gateway and DNS
information.
5) If the static option is chosen you will able to scroll down and manually change the IP, Netmask,
Gateway and DNS information.
6) When the connection process is completed with either DHCP or Static option the Success screen will
appear.
24
2
5
Network Confi guration
3
6