Table of Contents
Advertisement
a.
Blower - Ambient Air Temperature: < 40ºC or 104ºF
b.
Blower - Relative Humidity: 90% max - non-condensing
c.
AC Drive - Consult User Manual for specific AC Drive environmental constraints
6.
Motor and AC Drive Cooling Fan Air Supply
a.
Fresh ambient air, non re-circulated, must be available to cooling fans
b.
Motor or AC Drive must not be enclosed without source of positive pressured fresh air
Filter Maintenance Schedule
Filtration is critical to performance, longevity, and enforcing the warranty on JetAir Industrial Blower Systems.
following are general guidelines for standard polyester canister filter replacements in various commercial environments.
Request a JetAir sales engineer for specific guidelines for your application and environment:
7.
Beverage –
8.
Beverage –
9.
Industrial -
10. Industrial –
11. Textile
-
Claim Process
The following procedure is followed in the event of a Blower System or other component failure:
•
Contact the JetAir Service Department to report the failure at 805-654-7000 (USA)
•
JetAir will then email or fax a "Warranty Claim Information" form to be completed by the customer and faxed or
emailed back to JetAir
•
If there is a valid warranty claim, then JetAir will email or fax a "Return Authorization" (RA) form to the
customer
•
The Customer will crate and ship door-to-door, prepaid and insured, the failed component(s) with RA attached
back to JetAir at customer's expense. Any components damaged in return shipping due to poor packaging or
freight handling are the responsibility of the customer.
•
If an immediate replacement component is required by the customer, the customer must issue a Purchase Order
for the replacement item(s) and JetAir will make best efforts to ship the replacement within 24-48hrs.
•
JetAir, upon receipt of the warranty claim component, will evaluate the component for a root cause of failure and
will provide a written report indicating reason(s) causing the failure with corrective action recommendations
within 30 days of receipt of the components.
•
Failures due to workmanship and material defects are covered under warranty as described herein. JetAir will
either replace or repair the defective component at its discretion. In this case, a Credit Memo will be issued
against the customer's Purchase Order resulting in no net charges.
Additional Applicable Warranty
JetAir makes no warranties for non-JetAir branded products, services, maintenance or support.
maintenance or support is provided by JetAir "as is" and any third-party warranties, services, maintenance and support are
provided by the original manufacturer or supplier, not by JetAir.
in JetAir's applicable JetAir branded warranty or service description in effect on the date of the invoice, packing slip or
acknowledgement. JetAir-branded warranties and services are effective on payment in full, and JetAir is not obligated to
honor any warranty or provide service unless JetAir receives payment in full within the payment terms stated on your
invoice.
JetAir may request cancellation of third-party-branded services, maintenance or support if JetAir does not receive
payment.
If you purchase third-party-branded product, services, maintenance, or support through JetAir, then those
third-party terms, conditions, and expressed warranties apply.
There are no warranties, express or implied by either distributor, manufacturers' representative or original equipment
manufacturer (OEM) on new JetAir branded equipment except the warranty against defects in material and workmanship
described herein.
Terms and Conditions
JetAir Technologies shall not be liable for any other damages, whether direct or indirect, economic commercial, incidental or
consequential, resulting from use of any JetAir branded or non JetAir branded product sold by JetAir. Any modification,
alteration, adjustment, re-programming, misuse, neglect, accidental damage, abuse or other unauthorized adaptation shall
immediately void this warranty.
Due to factors beyond JetAir's control, JetAir Technologies is not responsible for determining suitability or for developing,
certifying, or approving specifications, design, or construction of end user applications involving JetAir branded and non-
branded equipment sold by JetAir.
installed per your specification, only for JetAir branded product failures due to workmanship and material defects as
described herein. JetAir does not approve installation in hazardous or potentially explosive atmosphere locations.
JetAir Technologies' warranty covers repairs or replacement of JetAir branded products only, and will not cover labor for
removal, installation, accessories or other items not considered an integral Blower part. Product returned for failures
determined to be caused by abuse, misuse, or repeat offense will be subject to an evaluation fee of $250. Maximum liability
will in no case exceed the value of the product purchased. Shipping and freight costs are the responsibility of the
purchaser; JetAir Technologies will not accept shipments freight-collect, unless prior written authorization is provided by
JetAir Technologies. Damage resulting from mishandling during shipment is not covered by JetAir Technologies' warranty. It
is the responsibility of the purchaser to file claims with their carrier.
This warranty does not cover:
•
Non-JetAir branded products and accessories
•
Problems that result from:
External causes such as accident, abuse, misuse, misapplication, or problems resulting from customer
o
supplied electrical power
Servicing of JetAir branded components not authorized by JetAir
o
V1.5 ©2009 JetAir Technologies, LLC
Soda and Juices
Beer
Oil Mist
Dust
Fabric debris
Further, JetAir is not responsible for the success or failure of JetAir Blower system(s) as
30 days
60 days
60 days
90 days
120 days
JetAir makes no express warranties except those stated
The
Such products, services,
- 27 -
Hide quick links:
Advertisement
Table of Contents
