Boss Food Processor Instruction Manual page 5

5
6
Using the Whisker Disc
Place the whisker disc onto the food
processor drive shaft. Ensure that it
fit properly and push down low inside
the bowl.
Add the food to be processed, curd or
cream, to the bowl. Place the bowl
cover over the food processor bowl
and rotate anti-clockwise to lock.
The food to be processed can also be
added through the feeder tube while
the machine is functioning.
The Twin Feeder Tube
The Boss Food Processor has a twin
feeder tube. This enables better
processing of different food sizes and
also reduces the chances of the food
bounding back once it contacts the
high speed discs. Choose the tube in
accordance with the size of the food
to be processed.
Using the Blade
1) The tri chips blade is used to
make finger chips.
2) The slicing blade is used to slice
vegetables or fruits.
3) The shredding blade can be used
for shredding vegetables like
cucumber. It can also help shred
vegetables for chinese dishes.
4) The coconut shredding blade is
suitable for fine shredding of
coconut.
*Select the blade, fit on blade holder
Insert the blade holder into the drive
shaft.
5
1
Remove the lid on the liquidiser side
by turning clockwise. Place the
liquidiser jar on to the drive and
rotate anti-clockwise to lock.
2
Add the ingredients to be processed.
Place the lid on top of the liquidiser
jar and rotate clockwise to lock.
Note : Before using any Jar on motor unit check bowl & cover fitted properly, if bowl cover is not
fitted Properly, food processor will not start.
3
The liquidiser jar should not be filled
more than 2/3 of the jar capacity.
Switch ON the machine and turn to
position 1. The pulse position can be
used for additional froth in milk
shakes, coffee or lassi.
4
Once the operation is complete
switch OFF the machine and remove
the liquidiser jar by rotating
clockwise
6