1. Manuals
  2. Brands
  3. Audiovox Manuals
  4. Network Card
  5. RTM-8000
  6. Owner's manual

Audiovox GSM/GPRS Compact Flash Card RTM-8000 Owner's Manual

Gsm/gprs compact flash card
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
RTM-8000
GSM/GPRS Compact Flash Card
Owner's Manual

Advertisement

Table of Contents
loading

Summary of Contents for Audiovox GSM/GPRS Compact Flash Card RTM-8000

  • Page 1 RTM-8000 GSM/GPRS Compact Flash Card Owner’s Manual...

  • Page 2: Copyright Statement

    Copyright Statement Copyright 2002 by Audiovox Communications Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval sys- tem or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, with- out the prior written permission of Audiovox Communications Corp..
  • Page 3 Important Safety Precautions When using this product, the safety precautions below must be taken against possible legal issues and damages. SAFETY IN AIRCRAFT The interference would be caused by this product to an aircraft's navigation system and its network. In most countries, using this product on board an airplane is against the law.
  • Page 4 Attention Handle the product with care. Do not drop, bend or apply strong forces to the product. Otherwise, unrecoverable damages will occur in its internal components. There are no user serviceable parts inside this product. If this product appears to be broken, call a qualified service personnel or send this product to your original dealer.

  • Page 5: Exposure To Radio Frequency Radiation

    Tips When Using • Avoid using the product near metal structures (for example, large metal furni- ture or steel frames of a building). The transmission and reception of signal can be effected by these objects. • Avoid using the product near strong electromagnetic sources, such as microwave ovens, sound speakers, TV and radio.
  • Page 6 <Blank Page>...

  • Page 7: Table Of Contents

    Table of Contents Overview Welcome ...2 Package Contents ...3 Appearance ...4 Installing and System Requirements ...7 Configuring the RTM-8000 Installing the RTM-8000 ...7 Using the RTM- Using Wireless Data Connection on 8000 Pocket PC ...34 Using Wireless Data Connection on PC ...38 Dialer (For Pocket PC Only) ...39 The RTM-8000 ...
  • Page 8 Starting Dialer ... 40 Exit ... 43 Dialer Screen ... 44 Icons on the Status Display ... 44 Command Bar ... 45 Mode Buttons ... 45 Show/hide Tool Bar Button ... 45 Volume Adjustment Slider ... 46 Send Key ... 46 Cancel Key ...
  • Page 9 category ... 62 Duplicating a Phonebook entry ... 63 Message ... 64 Writing and sending a new message ... 64 Reading a message ... 66 Searching for a message ... 67 Replying to a message ... 68 Forwarding a message ... 69 Re-sending a message ...
  • Page 10 Troubleshooting Information ... 96 Card information ... 96 Online Help ... 96 About Dialer ... 96 Installation of the RTM-8000 is unsuccessful ... 98 Can not make or receive calls ... 98 Can not establish GPRS connection ... 98 GPRS connection is slow and unstable ... 99 Cannot return to voice services from GPRS data connection ...
  • Page 11 Overview...

  • Page 12: Overview

    Welcome Congratulations on your purchase of the RTM-8000, GSM/GPRS Com- pact Flash card! With this card, you can instantly turn your Pocket PC or PC into a wire- less communication device so you can perform voice/data communication anytime and anywhere. You can not only enjoy high quality voice com- munication but rapid and stable GPRS data connection.

  • Page 13: Package Contents

    Package Contents Check the contents of the package. The following items should be included. If there is any item damaged or missing, please contact your dealer immediately. Description The GSM/GPRS Compact Flash Card Earphone (with remote controller) Software CD-ROM This Owner’s Manual Quantity Overview...

  • Page 14: Appearance

    Appearance The RTM-8000 Antenna Status indicator SIM card socket Move the antenna upward while in use. Headset jack Note: The headset can be plugged into the headset jack for making a call or answer- ing incoming calls. Do not remove the antenna from the RTM-8000. Overview...

  • Page 15: The Status Indicator

    The status indicator The working status of the RTM-8000 is shown by the status indicator. Please refer to the table below for the blinking patterns of the indicator and the status they represent: Color Pattern Amber Blink every second Amber Blink slowly Amber Blink fast...

  • Page 16: Installing And

    Installing and Configuring the RTM-8000...

  • Page 17: System Requirements

    System Requirements Check your hardware and software and see if they satisfy the requirements below. If you are not sure, please consult your dealer or operator. Hardware & software requirements • A valid SIM card. • A Type I Compact Flash Card slot or a PCMCIA (PC Card) slot and a PCMCIA-to-Compact Flash adapter card (Optional) For Pocket PC: •...
  • Page 18 Insert the SIM card into the SIM card socket flip. Pay attention to the direction of the SIM card and the metal contact when you insert. The beveled corner Metal contact Close the SIM card socket flip and slide it into place. Installing and Configuring the RTM-8000...

  • Page 19: Install The Rtm-8000 To Pocket Pc

    Install the RTM-8000 to Pocket PC Refer to the illustration below to insert the RTM-8000 into Pocket PC. Note: The way to insert the RTM-8000 may be different from Pocket PC to Pocket PC. Please refer to the documentation of your Pocket PC for details. The configuration below is for reference only.
  • Page 20 Tap the Connections Tap the Connections Installing and Configuring the RTM-8000 tab. icon.
  • Page 21 Tap to select Internet Settings. Tap Modify. Installing and Configuring the RTM-8000...
  • Page 22 Tap New... Enter the name of the connection and select GPRS Modem. Set baud rate to 115200. Tap Advanced... to continue. Installing and Configuring the RTM-8000...
  • Page 23 TCP/IP tab. Make sure that Use server-assigned IP addresses selected. Uncheck Use software compression Use IP header compres- sion checkboxes. Tap Name Servers tab to continue. Make sure that Use server-assigned addresses is selected and tap ok. Installing and Configuring the RTM-8000...
  • Page 24 Tap Next. Enter *99# in the Phone number field and leave the Country code Area code fields empty. Tap Next. Installing and Configuring the RTM-8000...
  • Page 25 Enter +cpin="****";+cgdcont=1,"ip","APN" code, and APN is the Access Point Name of your operator) in the dial-string modem commands: not enabled, just enter +cgdcont=1,"ip","APN". Tap Finish. For example, If your PIN code is 1234, and the APN of your operator is "internet", enter the fol- lowing: +cpin="1234";+cgdcont=1,"ip","internet"...
  • Page 26 Dialing Locations tab. Dialing Patterns... Installing and Configuring the RTM-8000...
  • Page 27 Enter in all fields and tap ok. Tap ok. The configuration is complete. Installing and Configuring the RTM-8000...

  • Page 28: Installing The Rtm-8000 On A Pc

    Installing the RTM-8000 on a PC To install the RTM-8000 on a PC: • According to the operating system of your PC, install appropriate driver and then the RTM-8000 Compact Flash card. • Configure the settings of the RTM-8000 Compact Flash card driver. Note: Be sure to install RTM-8000 driver before inserting the card into your Installing RTM-8000 driver Installing driver for Windows 98 SE/Me...
  • Page 29 Click Next. The installation wizard will start copying files to your system. Installing and Configuring the RTM-8000...
  • Page 30 The installation wizard will ask you to restart your computer. Close all running programs and click The following message will appear on the screen after restart. Insert the RTM-8000 into your PC and click OK. Note: The way to insert the CompactFlash and PCMCIA card may be differ- ent from PC to PC.
  • Page 31 The RTM-8000 will be detected automatically as a GPRS Modem. The installation wizard will continue with the rest of the installation pro- cess automatically. Click OK. GPRS Modem Configuration Tool window will appear. Follow the description of “Configuring the settings of the RTM-8000” on page 31 to configure the settings of driver.

  • Page 32: Installing Driver For Windows 2000

    Click Finish. The installation of the RTM-8000 is complete. Installing driver for Windows 2000 Insert the CD-ROM into your CD-ROM drive and double-click the setup.exe icon in the WIN2000&XP folder. Driver installation wizard will appear on the screen. Installing and Configuring the RTM-8000...
  • Page 33 Click Next. The installation wizard will start copying files to your system. Installing and Configuring the RTM-8000...
  • Page 34 The following message will appear on the screen. Insert the RTM-8000 into your PC and click OK. Note: The way to insert the CompactFlash and PCMCIA card may be differ- ent from PC to PC. Please refer to the documentation of your PC for details.
  • Page 35 Click OK. GPRS Modem Configuration Tool window will appear. Follow the description of “Configuring the settings of the RTM-8000” on page 31 to configure the settings of driver. Click Finish. The installation of the RTM-8000 is complete. Installing and Configuring the RTM-8000...

  • Page 36: Installing Driver For Windows Xp

    Installing driver for Windows XP Insert the CD-ROM into your CD-ROM drive and double-click the setup.exe icon in the WIN2000&XP folder. Driver installation wizard will appear on the screen. Click Next. Installing and Configuring the RTM-8000...
  • Page 37 The installation wizard will start copying files to your system. The following message will appear on the screen. Insert the RTM-8000 into your PC and click OK. Note: The way to insert the CompactFlash and PCMCIA card may be differ- ent from PC to PC.
  • Page 38 Found New Hardware Wizard will appear on the screen. Click Next. The computer will start detecting the RTM-8000. Installing and Configuring the RTM-8000...
  • Page 39 Click Continue Anyway. The wizard will continue installing. Click Finish. Installing and Configuring the RTM-8000...
  • Page 40 The computer will detect the RTM-8000 again. Click OK. GPRS Modem Configuration Tool window will appear. Follow the description of “Configuring the settings of the RTM-8000” on page 31 to configure the settings of driver. Click Finish. The installation of driver is complete. Installing and Configuring the RTM-8000...

  • Page 41: Configuring The Settings Of The Rtm-8000

    Configuring the settings of the RTM-8000 You can configure the settings of the RTM-8000 in the Configuration Tool window during installation. If you need to change these settings afterwards, click GPRS Modem Tools, Modem Configuration Tool window and make changes. The section below describes each setting item in the window.
  • Page 42 Phone Number Enter the phone number to dial, for data connections (such as *99#) in this field. This is specified by your operator. Extra Setting Required If extra settings are required, you can enter the parameters here. These include: Only: If only the APN address is required, enter that of your opera- tor here.

  • Page 43: Using The Rtm

    Using the RTM-8000...

  • Page 44: Using Wireless Data Connection On Pocket Pc

    Using Wireless Data Connection on Pocket PC Tap Start, Settings. Connections tab. Using the RTM-8000...
  • Page 45 Tap the Connections icon. Tap Connect. Using the RTM-8000...
  • Page 46 If used, enter the user name and password supplied by your operator. Tap Connecting... dialogue box pops up. Using the RTM-8000...
  • Page 47 If connection is established successfully, Connected dialogue box will appear. Now you are ready to surf the Internet using Pocket Internet Explorer or other applications. Note: To disconnect from the Internet again, tap the two-arrow symbol on the top bar of your PDA screen. When the dialog box appears, tap End. Using the RTM-8000...

  • Page 48: Using Wireless Data Connection On Pc

    Using Wireless Data Connection on PC The RTM-8000 driver creates a GPRS Modem Connection icon on your desktop. Double-click the icon and the connection dialogue box will appear on the screen. You can also open such dialogue box by clicking the Start button on Win- dows Taskbar and selecting Programs,...

  • Page 49: Dialer (For Pocket Pc Only)

    Dialer (For Pocket PC Only) Overview Dialer is a Pocket PC application program that is designed to work with the RTM-8000. It provides an easy and intuitive interface to change your Pocket PC into a GSM/GPRS mobile phone. Features • Integrates the data in your Contact and Phonebook. You can make phone calls from your entries directly.

  • Page 50: Installing Dialer

    Installing Dialer Before installing Dialer: • Backup the data on your Pocket PC. • Make sure your Pocket PC is connected to your PC and RTM- 8000 is inserted. Insert the software CD-ROM into your CD-ROM drive and double-click Dialer10EN.exe The installer starts automatically.
  • Page 51 Tap Dialer. If the PIN code of your SIM card is enabled, you will be prompted to enter it. Enter your PIN code and tap OK. Note: If you entered wrong PIN code three times in a row, the SIM card will be blocked.
  • Page 52 Dialer main screen will appear. It will start searching for the network automatically. If network is acquired, the operator name will appear on Dialer. If no net- work is available, Off Line will appear instead. Using the RTM-8000...

  • Page 53: Exit

    Note: If no SIM card is installed on RTM-8000, or the SIM card is invalid, you can only tap to make emergency calls. Exit To exit Dialer, tap Edit on the Command Bar and select Exit. Using the RTM-8000...

  • Page 54: Dialer Screen

    Dialer Screen Send Key Command Bar Show/hide Tool Bar Button Icons on the Status Display Icon Meaning Signal strength Battery level Using the RTM-8000 Mode Buttons Description Indicates the strength of network signal. The more bars displayed, the stronger the signal. Indicates the level of Pocket PC battery.

  • Page 55: Command Bar

    New voicemail This icon indicates that you have a new voicemail. This icon appears when a new text message is New text message received. This icon indicates that your mailbox is full and Mailbox full you need to delete some messages. This icon indicates that you are roaming under Roaming another GSM network.

  • Page 56: Volume Adjustment Slider

    Volume Adjustment Slider Drag the slider to adjust headset volume. Dragging it to the right increases volume and left decreases volume. Send Key • When there is an incoming call, tap this key to answer the call. • After phone number is entered using alphanumeric keys, tap this key to dial.

  • Page 57: Using Dialer

    Using Dialer Making a call To make a call: Tap alphanumeric keys to enter phone number. Note: • To clear a wrong number, tap • To insert pauses between numbers, tap • To make an international call, tap and hold prefix) appears, and then enter the country code, area code (omit the zero) and phone number.

  • Page 58: Redialing The Last Dialed Call

    key to dial. When the call is connected, the phone number and call time counter will appear on the status display. key to end the call. You can also make a call from your Phone Book. For details, please refer to “Making a call from Phonebook”...

  • Page 59: Answering A Call

    Answering a call When an incoming call is received, ring tone is generated and the icon flashes. Meanwhile, if the caller ID is available and can be found in your Phonebook, the caller’s name will appear on the status display. Oth- erwise, only "Unknown number"...

  • Page 60: Missed Call Message

    Missed call message If a call (or multiple calls) is missed, the missed call message containing the last missed caller’s name ("Unknown number" is shown when the caller’s name is unknown) will appear on the status display. key to clear the message. You can also view the details of missed calls or reply to them.

  • Page 61: Listening To Voicemail

    Listening to voicemail When a voicemail message is received, the icon appears on the status display. Tap key to connect to your voicemail box and listen to the voicemail message. Using the RTM-8000...

  • Page 62: Options During A Call

    Options during a call Note: To use the functions during a call, you need to subscribe them to your opera- tor and enable them in Dialer. For details on how to enable them in Dialer, please see “Call Service” on page 73. Call waiting If another call is received when you are on a call, the call waiting message will appear.

  • Page 63: Call Swapping

    Call swapping To swap two active calls: Tap Options. Call State window appears. Tap Swap. Using the RTM-8000...

  • Page 64: Conference Call

    Conference call To establish a conference call in a multi-party call, tap Conference in the Call State window. Private call During a conference call, tap to select a calling party and tap Private in the Call State window. With this function, you can talk to the calling party you selected without being heard by the other calling parties.

  • Page 65: Holding/Unholding A Call

    Holding/Unholding a call To hold/unhold a call in a multi-party call, tap to select the call you want to hold/unhold and tap Hold or Unhold. Disconnecting a call To disconnect a call in a multi-party call, tap the call you want to discon- nect in the Call State window and tap Disconnect.

  • Page 66: Phonebook

    Phonebook Dialer’s Phonebook integrates the Phonebook data on your SIM card and the Contact data in the Pocket PC. You can manage the data easily and make calls from them quickly. To enter Phonebook mode, tap the Phone Book mode button Adding a new Phonebook entry To add a new Phonebook entry: In Phonebook mode, tap the Show/hide Tool Bar Button...

  • Page 67: Specifying Your Own Number

    Add New Phone Number screen will appear. Enter name, number and select where this new entry will be saved in the Memory drop-down menu. Specify a location by tapping the arrows in the Position box. Specifying your own number Select Owner number in the Memory drop-down menu and enter your own phone number.

  • Page 68: Viewing Phonebook Entries

    Viewing Phonebook entries In Phonebook mode, tap the drop-down menu select a category, and the Phonebook entries under selected category will appear. For example, if on the SIM card will appear. Viewing details of a Phonebook entry • Tap to select an entry and then tap the button •...

  • Page 69: Making A Call From Phonebook

    Making a call from Phonebook In Phonebook mode, tap an entry (or a call record) and then tap ton on the Tool Bar. Or, Tap and hold an entry and select menu that appears. Dialer will begin making the call automatically. Editing a Phonebook entry Refer to “Viewing details of a Phonebook entry”...

  • Page 70: Adding/Editing/Deleting A Phonebook Category60

    Adding/editing/deleting a Phonebook category In Phonebook mode, tap Category... Enter the name of the new category and tap Add. Using the RTM-8000 Edit on the Command Bar and select Edit a...
  • Page 71 To rename an existing category, tap to select the category in the Current Phonebook Category list and tap Rename. To delete a category, tap to select the category and tap Delete. Using the RTM-8000...
  • Page 72 Copying/moving a Phonebook entry to another cat- egory After you create a new Phonebook category, you can use this function to copy or move Phonebook entries to the new category. In Phonebook mode, tap to select a Phonebook entry (or tap and drag to select multiple entries), then tap Copy to...

  • Page 73: Duplicating A Phonebook Entry

    The "Copy Phone Number to" screen appears. If you want to copy selected entry (or entries), tap Range. Tap Then, tap the "To:" drop-down menu to select the destination category. to start copying. Follow similar steps to move Phonebook entries. Duplicating a Phonebook entry To duplicate a Phonebook entry: •...

  • Page 74: Message

    Message You can read, write and send text messages in Message mode. Tap button on the Tool Bar to enter Message mode. Note: Before you can use the Message functions, you need to set up related mes- sage settings first. For details, please refer to “SMS Service” on page 81. Writing and sending a new message Tap the Show/hide Tool Bar Button sage...
  • Page 75 Edit the message. Enter receiver’s number or tap the a receiver or multiple receivers from Phonebook. Send to send the message immediately. If you want to save the mes- sage and send it later, tap Save. The sent messages will be saved in Receiver button to pick up Enter the contents of the text...

  • Page 76: Reading A Message

    Reading a message You can view the contents of a message by doing any of the following: • In Message mode, tap to select a message, then tap mand Bar and select Properties. • Tap to select a message and then tap the •...

  • Page 77: Searching For A Message

    Searching for a message Enter the keyword in the Search field. The message(s) containing the key- word will appear. Enter here Using the RTM-8000...

  • Page 78: Replying To A Message

    Replying to a message In Message mode, double-tap the message you want to reply. Or, tap to select the message you want to reply, then tap Bar and select Reply Edit the reply message and tap Reply. Using the RTM-8000 Message...

  • Page 79: Forwarding A Message

    Forwarding a message In Message mode, double-tap the message you want to forward in Draft folder. Edit the message. Enter receiver’s number or tap the receiver or multiple receivers from the Phonebook. Send to send the message or Receiver button to pick up a Enter the contents of the text message (optional).

  • Page 80: Re-Sending A Message

    Re-sending a message You can use this function to send a message again. In Message mode, tap to select a message in Outbox, and tap the Or, tap and hold a message in Outbox, Send message in the submenu that appears. Using the RTM-8000 button on the Tool Bar.

  • Page 81: Adding/Renaming/Deleting A Message Folder

    Adding/renaming/deleting a message folder In Message mode, tap Edit on the Command Bar and select Edit a Cate- gory... To add a new folder, enter the name of the new folder and tap Add, ok. Using the RTM-8000...
  • Page 82 To rename an existing folder, tap to select the folder in the Current SMS Category list and tap Rename. To delete a folder, tap to select the folder and tap Delete. Using the RTM-8000...

  • Page 83: Services

    Services You can set up and activate/deactivate operator dependent services. Call Service Tools on the Command Bar and select Options..., Call Service screen will appear. Tap each tab to view its options. Call Service... Using the RTM-8000...

  • Page 84: General

    General Here you can decide whether you want to send your number to the recip- ient or not when calling. If you do not send your number while making a call, your number will not appear on recipient’s phone. Call divert If for any reason you can not answer a call, you can activate the call divert function to direct incoming calls to a specific phone number.

  • Page 85: Call Waiting

    • Voice call - Divert all: divert all incoming voice calls unconditionally. • Voice call - Divert when busy: divert all voice calls when you are on a call. • Voice call - Divert when no not answered. • Voice call - Divert when not are outside the network coverage area.

  • Page 86: Call Barring

    Call barring With this call service, you can bar (restrict) incoming and outgoing calls under certain conditions. • Outgoing call - Barring • Outgoing call - Barring international tional calls. • Outgoing call - Barring international calls except ing international calls except the calls made to your home country. •...

  • Page 87: Send Unstructured Supplementary Service Data

    Send unstructured supplementary service data You can enter unstructured supplementary service data (USSD) and access related services. For details about the contents of service, please consult your operator. Enter data here and tap Send. Using the RTM-8000...

  • Page 88: Network Service

    Network Service Tools on the Command Bar and select Options..., The network service setting deals with the selection of network. You can let the RTM-8000 select a home network automatically, or when you are roaming under another network, you can select the friendly network manually by yourself.

  • Page 89: Security Service

    Security Service Tools on the Command Bar and select Options..., Options in Security service allow you to enable/disable and modify secu- rity codes. Security Enable/disable PIN code request. If enabled, you will be asked to enter your PIN code when starting Dialer. Enable/disable phone code request.

  • Page 90: Changing Access Codes

    Changing access codes Network Code: The code for accessing your operator’s GSM network. You can get such code from your operator Phone code: The code for preventing unauthorized use of your RTM-8000. If Phone code is enabled, you have to enter it each time you run Dialer.

  • Page 91: Sms Service

    SMS Service Tools on the Command Bar and select Options..., Service... Here you can configure message settings. For detailed parameters, please contact your operator. Using the RTM-8000...
  • Page 92 • SMS service center: enter your message service center number (avail- able form your operator). • Voice mail number: enter the voicemail box number (available form your operator). • Send as: depending on the device that will receive your message, tap to select a format for sending messages.

  • Page 93: Settings

    Settings General Settings The options of General Settings allow you to replace Dialer skin (back- ground) and adjust power settings. Tools on the Command Bar and select Options..., General Settings... The General Setting window will appear. Using the RTM-8000...

  • Page 94: Choosing A Skin (Background)

    Choosing a skin (background) You can select any bitmap (.bmp format, 240x270 pixels) file (for exam- ple, your favorite photo) as the skin (background appearance) of your Dialer main screen. Select to browse for and select a desired file. There are three skin options: •...

  • Page 95: Ringer Settings

    Ringer Settings The options of Ringer Settings allow you to customize the ring tones for incoming calls and messages. Tools on the Command Bar and select Options..., Tap the arrows to adjust delay duration. Drag the slider to adjust ring tone/alert tone volume.

  • Page 96: Button Settings

    Button Settings Options of Button Settings allow you to assign several frequently used actions to the hardware buttons of your Pocket PC. Tools on the Command Bar and select Options..., Tap to select a button in the Using the RTM-8000 Button Hardware button box.
  • Page 97 Tap to select an action in the Button assignment box. Tap ok. Now you can use the hardware buttons of your Pocket PC to exe- cute their assigned actions. Note: The Screen toggle action allows you to turn off the screen while keeping Dialer active.

  • Page 98: Display Rules

    Display Rules You can set up the display format of phone numbers in Dialer with the options of Display Rules. Multiple display rules can be established and Dialer will detect the numbers you entered and convert them to corre- sponding preset formats automatically. For example, if a 10-digit display rule has been created: When you enter a 10-digit phone number 0234567890, Dialer will change its format into (02)3456-7890 automatically.

  • Page 99: Changing The Priority Of A Display Rule

    Enter a new display rule and tap Add. Note: The new display format is assigned the lowest priority by default. Changing the priority of a display rule Tap to select a display rule and then tap to move the priority one level up, or to move the priority one level down.

  • Page 100: Reset To Default Settings

    Reset to default settings To reset the settings of Dialer to their default values, tap Command Bar and then select Options, Using the RTM-8000 Tools on the Reset to Default Settings...

  • Page 101: Data Connection

    Data Connection Establishing GPRS Data Connection Note: • The GPRS settings must be configured before you can use GPRS data connec- tion. Follow the description in “Install the RTM-8000 to Pocket PC” on page 9 to configure GPRS data connection settings. •...
  • Page 102 A dialogue box will appear. Click Yes. Tap Connect. Using the RTM-8000...
  • Page 103 If used, enter the user name and password supplied by your operator. Tap Connecting... dialogue box pops up. Using the RTM-8000...
  • Page 104 If connection is established successfully, Connected dialogue box will appear. Now you are ready to surf the Internet using Pocket Internet Explorer or other applications. Using the RTM-8000...

  • Page 105: Returning To Voice Services From Gprs Data Con- Nection

    Returning to voice services from GPRS data connec- tion Terminate the GPRS data connection by tapping the connection in progress icon (the two-arrow symbol) and then the Connected dialogue box that appears. Tools on the Command Bar and then select Enable GSM.

  • Page 106: Information

    A dialogue box will appear. Tap Yes. Information Card information You can view the information about your RTM-8000 here. Tap the Command Bar and select will appear on the screen. Online Help To access online instructions on using Dialer, tap Bar and select Help.

  • Page 107: Troubleshooting

    Troubleshooting...

  • Page 108: Installation Of The Rtm-8000 Is Unsuccessful

    Installation of the RTM-8000 is unsuccessful If you are installing the RTM-8000 to PC, check the following: • Did you install appropriate driver according to your operating system? Otherwise, re-install using appropriate driver program. • Did you insert the RTM-8000 into your PC before you are prompted to do so? Remove the driver program using Add/Remove Program in Control Panel and install again.

  • Page 109: Gprs Connection Is Slow And Unstable

    GPRS connection is slow and unstable • Disconnect and connect again. You may be switched to a better net- work trunk line with better communication quality. • If the problem persists, avoid using GPRS connection during the time when network traffic is heavy, or move to a location where signal reception is better.
  • Page 110 <Blank Page> Troubleshooting...
  • Page 111 <Memo>...
  • Page 112 P/N:PKEDS19002A D/N:EDS0207ENVerA...

Table of Contents