Advertisement
C510R Control and Socket Description
Side View
CS connector locking screw
Description of connectors and controls on side of C510R
Pin arrangement for Auto Iris lens socket
1
Pin
- Video AI
(+12V)
Pin 2 - Video AI
(Not Connected)
Pin 3 - Video AI
(VIDEO)
Pin 4 - Video AI
(GROUND)
CS connector locking screw -
connector to assist with focussing the lens if you cannot get a clear image using the focus ring.
Description of controls and connectors on the back panel of the C510R camera
Lens:
Video -
Switch to this if using a Video Drive auto iris lens (ignore if using Manual Iris lens)
DC -
Switch to this if using a DC (Direct) drive auto iris lens (ignore if using Manual Iris lens)
PL:
Power LED -
Lights up when power to camera is on
Dip Switches:
AWB ON -
Auto White Balance ON
AWB OFF -
Auto White Balance OFF
EE -
Electronic Exposure control (
automatically control the exposure time of the CCD image sensor according to the incoming light level.
With this mode selected, a fixed or manual iris lens can be used instead of an auto iris lens
AI -
In AI mode, the CCD shutter speed is fixed to 1/60(1/50) second. And the incoming light level is
controlled by the auto iris lens.
BLC
-
Back Light Compensation On/Off (On=Auto BLC, Off=Strong BLC (very bright background))
Level:
Phase Adjustment -
When using a DC drive Auto Iris lens adjust this control for best image quality
Video Out:
BNC Female connector -
1
2V DC IN:
Power connector -
Connect using supplied 12Volt Power Adaptor or extension cable
1
2
Tighten this screw to lock the CS connector. Loosen to adjust the CS
In EE mode, a continuously variable electronic shutter is employed to
Connects to BNC Male connector as fitted to supplied extension cable
Rear View
3
4
DC AI
(DAMP -)
DC AI
(DAMP+)
DC AI
(DRIVE+)
DC AI
(DRIVE -)
VIDEO OUT
LENS
VIDEO
DC
LEVEL
PL
AWB ON
OFF
EE
AI
BLC ON
OFF
12V DC IN
)
3
Advertisement
