Panasonic TC0938450-015CE Operating Instructions Manual page 42

10 Configure the alarm settings [Alarm]
[Area]
When selecting a VMD area in the screen, it will be numbered as area 1. (Subsequent areas will be numbered in
the order of selection.)
[All areas] button
When the [All areas] button is clicked, the whole area will become the VMD area, and "1(White)" will be
automatically applied to "Area".
[Status]
Select "On" or "Off" to determine whether or not to perform video motion detection.

On: Performs video motion detection.

Off: Does not perform video motion detection.

Default: Off
[Detection area]
Adjust the size of the VMD area using the slider. The smaller the selected value is, the higher the sensitivity of
VMD area becomes. The current value (1-10) will be displayed on the right of the slider.

Default: 1
42 Operating Instructions