Setup Guide - ASROCK Z97M Pro4 User Manual

3. Exit the Registry Editor window and restart the computer.
4. Press F2 to enter BIOS, then go to Advanced ‐> Storage Coniguration and
change SATA Mode to AHCI. Press F10 to save changes and exit.
5. Enter Windows 8/7. Windows will discover the new device and install AHCI
drivers automatically.

3.3.2 Setup Guide

Coniguring Rapid Start
Step 1
Run ASRock Rapid Start utility from Start -> All Programs -> ASRock Utility.
Step 2
If you have more than one hard drives in your system, you must select one, then
choose the Partition Size desired for your hidden partition and click on Create. he
system will automatically create a hidden partition according to your settings. If
there are SSD's installed into your system, it is recommended to create the partition
on the SSD.
Z97M Pro4
35