Table of Contents
Advertisement
RedPlate RP50DUO Operations Guide
FRONT PANEL:
Input Jack – Typical High impedance input to the amplifier. Designed to be "Pedal Friendly" in the unlikely event you will ever use a
pedal in front of the RP50D.
Bright Switch – Center = OFF, Down = sound of new strings, Up = normal Bright response
Tweed Volume & Tone
The first 2 controls make up the Tweed Preamp section which is designed to produce the classic Tweed tone.
Volume – This control sets the break up point and volume level of the Tweed channel.
Tone – Treble is emphasized at settings past 5, more bass at the lower numbers. When pulled it reduces girth for the Brownface era
tone. The tone control can be bypassed for a girth/volume jump by pressing the Boost button on the footswitch (see the Other Features
section of this manual).
TWEED PREAMP SECTION
2
Advertisement
Table of Contents
