Maintenance And Service/Troubleshooting - DeLonghi Dragon 4 Instructions For Use Manual

Maintenance and service/Troubleshooting

At the end of the set time the appliance switches on-standby
automatically. To go back to operating without the timer,
press the timer button twice.
The timer symbol disappears from the display.
note: the time is settable from 0.5 to 24 hours.
changing of the temperature scale
The display can show the temperature in both °f (fahrenheit)
and °C (Celsius). To select the desired temperature scale,
when the unit is in standby position, press and hold the "+"
and "eCo" keys for at least 10 seconds, then release.
The change of scale will be indicated by two short beeps.
Alarms
The appliance has a diagnostic system that makes it possible
to signal malfunctions.
In case of problems, the display will show an alarm message:
(Product failure)
With this alarm the appliance does not
operate. Check if the appliance is correctly
positioned. If the problem persists, contact
the nearest
(High temperature)
When the product's internal temperature
is too high, the heating power will
progressively and automatically be
reduced. The display shows
seconds, on and off. To remove the cause
of this alarm check that the unit is not
covered or obstructed.
TRouBLEsHooTIng
pRoBLEM
The appliance doesn't
work
Customer experience.
for two
cAusE
- Be sure it is plugged in and that the electrical
outlet is working.
- Check for any obstruction.
- The temperature may be set too low.
- The Key lock may be activated.
safety device
A safety device shuts the radiator down in the case of
overheating. To start the radiator up again, contact Customer
experience. See enclosed guarantee leaflet.
MAInTEnAncE AnD sERVIcE
Before performing any operations on the appliance, always
unplug from the mains socket and leave to cool.
Wipe the radiator with a soft damp cloth without using
detergents or abrasives. If the radiator is not to be used for
a long period of time, wrap the cable around the cable tidy
and store the appliance in a dry place. This appliance has
been made to last many years without problems. In the
event of malfunction or doubt, do not try and repair on your
own. There would be the danger of fire or electric shock.
Please refer to the enclosed guarantee leaflet for service and
assistance details.
- Plug into the power outlet.
- remove the obstruction and let the
appliance cool down. If the appliance
doesn't work please contact
experience.
- Set the temperature to a higher position.
- See the section "Key lock".
6
en
soLuTIon
Customer