Advertisement
About the Auto-Start function
With the Auto-Start function, the watch performs a 5-second countdown. When the
countdown reaches zero, stopwatch operation starts automatically. During the final
three seconds of the countdown, a beeper sounds with each second.
To use the Auto-Start function
1. While the stopwatch display is showing all zeros
(00'00"00) in the Stopwatch Mode, press D D D D D .
• At this time the auto-start indicator appears on the dis-
play to indicate that auto-start is on. Press D D D D D again to
turn auto-start off (indicated when the auto-start indica-
tor is not on the display).
2. Press E E E E E to start the countdown.
• Pressing E E E E E also causes the countdown time to appear
in place of the current time.
• When the countdown reaches zero, a tone sounds, the
Auto-start indicator
backlight illuminates the display, and a stopwatch tim-
ing operation starts automatically.
• To stop the Auto-Start countdown and return to the all-zeros display, press D D D D D .
• Pressing E E E E E while the Auto-Start countdown is in progress immediately start the
stopwatch.
ALARM MODE
When the Daily Alarm is turned on, the alarm sounds for
Animation area
20 seconds at the preset time each day. Press any button
(
A
L
M
)
to stop the alarm after it starts to sound.
Current time
When the Hourly Time Signal is turned on, the watch beeps
every hour on the hour.
• In the Alarm Mode (including alarm time setting), press
E E E E E to illuminate the display for about two seconds.
To set the alarm time
1. Hold down A A A A A while in the Alarm Mode until the hour
digits start to flash on the display. The hour digits flash
because they are selected .
• At this time, the alarm is automatically turned on.
2. Press C C C C C to change the selection in the following se-
Alarm on
Hour :
indicator
Minutes
quence.
Hourly time signal on
indicator
3. Press D D D D D to increase the selected digits. Holding down D D D D D changes the selection at
high speed.
• The format (12-hour and 24-hour) of the alarm time matches the format you select
for normal timekeeping.
• When setting the alarm time using the 12-hour format, take care to set the time
correctly as morning (no indicator) or afternoon (P indicator).
4. After you set the alarm time, press A A A A A to return to the Alarm Mode.
• If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Alarm Mode automatically.
To turn the Daily Alarm and Hourly Time Signal on and off
Press B B B B B while in the Alarm Mode to change the status of the Daily Alarm and Hourly
Time Signal in the following sequence.
[Alarm ON Indicator / Hourly Time Signal ON Indicator]
Both ON
Both OFF
To test the alarm
Hold down D D D D D while in the Alarm Mode to sound the alarm.
Hour
Minutes
Daily Alarm
Hourly Time
Only
Signal only
1995-2
Advertisement
