Honda 2001 Civic Sedan GX Owner's Manual page 36

Main Menu
Lights
Replacing a High-mount Brake
Light Bulb
FASTENERS
1. Open the trunk.
2. Undo the five fasteners on the
upper part of the trunk lining by
pushing on the center of each
fastener's head until it pops in.
3. Remove the screw in the center of
the two fasteners on the upper
part of the trunk lining. Pull the
lining back.
Maintenance
4. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
5. Remove the burned out bulb from
the socket by pulling it straight out
of its socket.
6. Push the new bulb straight into
the socket until it bottoms.
7. Reinstall the socket. Turn it
clockwise until it locks. Make sure
the new bulb is working.
8. Reinstall the trunk lining.
9. Put the two fasteners into the
holes on the upper part of the
trunk lining. Reinstall the screws.
CONTINUED