K-Tech ET301 Series Instruction Manual

K-Tech ET301 Series Instruction Manual

Keypad speakerphone

Advertisement

Quick Links

Operation

Making Calls

1. Press ON/OFF button, LED will turn ON
2. Dial a telephone number
3. When finished press ON/OFF button, LED will
shut OFF

Answering Calls

1. To answer the phone, press ON/OFF button,
LED will turn ON
2.
When finished, press ON/OFF button, LED will
shut OFF

Adjusting the speaker volume (4 levels)

While the unit is turned on, press VOL button to
increase the volume. After Level 4 the volume
resets to Level 1.

Registration

The K-Tech ET301 series meets FCC Part 15, Part
68 and IC standards and is ETL listed.
FCC Registration # US: ERCAL11BET301
Ringer Equivalence (REN) = 1.1B
Service & Warranty
Refer to the Service and Warranty sheet enclosed
with this unit.
Warning
K-Tech International, Inc does not represent this
product to be waterproof. To prevent fire or shock
hazard, DO NOT expose this unit to rain or mois-
ture. For more information on moisture resistant
units, contact K-Tech.
THE INFORMATION BELOW IS IMPORTANT.
YOU MUST HAVE THE SERIAL NUMBER
AVAILABLE WHEN CALLING K-TECH .
Serial Number:
____________________________
Date Installed:
____________________________
Installed by:
____________________________
Phone Line #:
____________________________
Phone line Voltage:
48VDC (POTS or CO line)
Made in the USA
K-Tech International, Inc
56 Ella Grasso Ave
Torrington, CT 06790 USA
Phone (860) 489-9399
Phone: 1-800-993-9399
Fax (860) 489-4399
BOK041
rev. 060621 Printed in USA
K-Tech
ET301 Series
Keypad
Speakerphone
Instruction Manual
Keep This Booklet for
Reference
Additional information is available at
www.KTechOnline.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ET301 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for K-Tech ET301 Series

  • Page 1 Level 1. Phone line Voltage: 48VDC (POTS or CO line) Registration The K-Tech ET301 series meets FCC Part 15, Part 68 and IC standards and is ETL listed. Made in the USA FCC Registration # US: ERCAL11BET301 ET301 Series Ringer Equivalence (REN) = 1.1B...
  • Page 2: Specifications

    Fortress (Flush Mount) Pre-Installation Check List Mounting and Wiring 1. Determine the mounting location and cut out 7.0” H x 3.5” W opening. Sentry Telephone Line (Cabinet Mount) 2. Using the faceplate as a template, mark the 1. Position the unit inside the phone •...

Table of Contents