Advertisement
To ensure the safe operation of this machine, you must read and understand all warnings and instructions in this book. If you
do not understand, ask your supervisor.
READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE
WARNING:
To reduce the risk of fire, electric shock, or injury:
1. You must be trained to operate this machine. This machine is to be operated for its intended use only.
2. Do not operate this machine unless it is completely assembled.
3. Always use a three-wire electrical system connected to the electrical ground. For maximum protection against electrical
shock, use a circuit that is protected by a ground fault circuit interrupter. Consult your electrical contractor.
4. To prevent electric shock, always remove the electrical plug from the electrical outlet before doing any repairs or mainte-
nance and when leaving the machine unattended.
5. To prevent electric shock, keep the machine surface dry. Do not subject to rain. Do not immerse or use this unit in stand-
ing water. Store the machine in a dry building area. Clean the machine with a dry cloth only. Do not expose the unit to
freezing temperatures.
6. Machines can cause an explosion when near flammable materials and vapors. Do not use this machine with or near fuels,
grain dust, solvents, thinners, or other flammable materials. Do not use flammables to clean this machine.
7. A qualified or authorized person must do maintenance and repairs.
8. Do not move or carry the unit when it is turned on. Do not pull or carry by the cord, use cord as a handle, close a door
on the cord or pull cord around sharp edges or corners. Keep cord away from heated surfaces. Do not unplug the cord
by pulling on it. To unplug, grasp plug, not the cord. Do not handle plug or air mover with wet hands.
9. Do not put any objects into openings. Do not use with any opening blocked; keep free of dust, lint, hair and anything that
may reduce air flow. Keep hair, loose clothing, fingers and all parts of the body away from openings and moving parts.
10. Turn off all controls before unplugging
11. Operate the unit on a level and stable surface to prevent it from falling and possibly causing injury or damage.
12. Do not drop or throw the unit. Treatment of this type can cause damage to the components and create hazardous conditions.
IMPORTANT SAFETY INSTRUCTIONS
2
Advertisement
